SGM LEKTRA MTU5 Quick Start Manual

Technical Data
Housing material:
Mechanical installation: DN150 PP fl ange or bracket
Protection degree:
Electrical connection:
Working temperature: -30 ÷ +70°C; +80°C non-continuous
Pressure:
Power supply: 24Vdc or 24, 115, 230Vac (specify at the order)
Power consumption:
Analog output:
Relays output:
Digital communication:
Max measure range:
[In case of non perfectly refl ecting surfaces, the maximu
distance value will be reduced]
Blind distance:
Temperature compensation:
Accuracy: ±0,5% (of the measured distance)
Resolution:
Calibration:
Warm-up:
LCD Display: Plug-in display/keyboard 4 buttons matrix LCD
Warranty
Products supplied by SGM LEKTRA are guaranteed for a period of 12 (twelve) months from delivery date according to
the conditions specifi ed in our sale conditions document.
SGM LEKTRA can choose to repair or replace the Product.
If the Product is repaired it will mantein the original term of guarantee, whereas if the Product is replaced it will have 12
(twelve) months of guarantee.
The warranty will be null if the Client modifi es, repair or uses the Products for other purposes than the normal conditions
foreseen by instructions or Contract.
In no circumstances shall SGM LEKTRA be liable for direct, indirect or consequiential or other loss or damage whether
caused by negligence on the part of the company or its employees or otherwise howsoever arising out of defective goods
Factory Test Certifi cate
In conformity to the company and check procedures I certify that the equipment:
MTU5
...................................... Production and check date:
Serial n. .......................................................
is conform to the technical requirements on Technical Data and it is made in conformity to the SGM-LEKTRA procedure
Quality Control Manager
Ultrasonic level transmitter
PC / PP wetted part
IP67 / IP68 (sensor)
Internal push connectors
from 0,5 to 1,5 bar (absolute)
max 1,5W
4÷20mA, max 750ohm
n°2 3A 230Vac (n.o.)
MODBUS RTU
max 0.5÷12m
digital from -30 to 80°C
not better than ±3mm
4 buttons or by MODBUS RTU
5 minutes typical
.................................
Process Control and Measurement
MTU5
0,5m
1mm
................................
825B136A