SGM LEKTRA TC26 Quick Start Manual

Compact capacitance level transmitter with settable relay built-in

Technical Data

Enclosure material:

Mechanical installation:

(to be insert into IP65 enclosure)
Mechanical protection:
Electrical connection:
Working temperature:
Power supply depend to the model:
Power consumption:
Analog output:
Relays output:
Serial port:
Measure range:
Temperature compensation:
Linearity:
Calibration: two push-buttons, for self-acquisition
LEDs display:
TC26-9
LEVEL 4-20mA transmitter + 1 settable relay insert, digital
tecnology, termal-drift compensation, two pushbuttons or
RS485 port for calibration. Local or remote calibration
possibility.
fig.1
fig.2
TC26/27/28/29
PP+Carbon steel
2 x 6pole plug-in connectors
-30 to +80°C
TC26 24Vdc, TC27 24Vac,
TC28 115Vac, TC29 230Vac
max 2,5W (1,5W Vdc)
4÷20mA max load 500 ohm
1 x SPDT 2A, 230Vac (resistive)
20pF÷10.000pF
by ref. internal capacitor
green LED flashing=measure
Fix=calibration
yellow LEDs for rel1 action
General
applied solutions for the applications
Bajonet
IP50
RS485
0,5%
TC26-9
The TC26-9 insert must be lodge into the IP65 capacitance-
sensor head commection.
Important to screw tight the cover of the head connection and
the cable gland in order to grant the sensor IP65.
Thanks to the bajonet fixing-system, to insert or remove the
TC26-9 from the head connection need to push and rotate.
Rotate clock-wise to fix into the head
Rotate reverse-clock-wise to remove from the head
fig.3
Mechanical installation
825B030D