Refrigerating Cycle - LG LW1223HRSM Svc Manual

Hide thumbs Also See for LW1223HRSM:
Table of Contents

Advertisement

13. Motor
1. Remove the cabinet. (Refer to section 2)
2. Remove the evaporator. (Refer to section 4)
3. Remove the orifice. (Refer to section 4)
4. Remove the blower. (Refer to section 4)
5. Remove the fan. (Refer to section 5)
6. Remove the control box cover and disconnect 5 or 4 wires
of motor housing. (Refer to section 3)
7. Remove the 4 screws that fasten the motor
from the mount motor. (See Figure 15)
8. Remove the motor.
9. Re-install the components by referring to the removal
procedure, above.

Refrigerating Cycle

CAUTION: Discharge the refrigerant system
using a Freon™ Recovery System. If there is
no valve to attach the recovery system, install one
(such as a WATCO A-1) before venting the Freon™.
Leave the valve in place after servicing the system.
14. Condenser
1. Remove the cabinet. (Refer to section 2)
2. Remove the 4 screws that fasten the brace.
(Refer to section 4)
3. Remove the 5 screws that fasten the condenser
and shroud.
4. After discharging the refrigerant completely,
unbraze the interconnecting tube at the
condenser connections.
5. Remove the condenser.(See Figure 16)
6. Re-install the components by referring to the removal
procedure, above.
15. Evaporator
1. Remove the cabinet. (Refer to section 2)
2. Remove the 2 screws that fasten the evaporator.
3. Move the evaporator sideways carefully.
(Refer to section 4)
4. After discharging the refrigerant completely,
unbraze the interconnecting tube at
the evaporator connections.
5. Remove the evaporator.(See Figure 17)
6. Re-install the components by referring to the removal
procedure, above.
16. Capillary Tube
1. Remove the cabinet. (Refer to section 2)
2. After discharging the refrigerant completely,
into a Freon™ Recovery System,
unbraze the interconnecting tube at the capillary tube.
3. Remove the capillary tube.
4. Re-install the components by referring to the removal
procedure, above.
Copyright © 2022-2023 LG Electronics Ins.
13
All right reserved.Only training and service purposes.
Disassembly
Figure 15
Figure 16
Figure 17

Advertisement

Table of Contents
loading

Table of Contents