Table of Contents
Advertisement
Disassembly
Air Handling Parts
4. Air Guide and Turbo Fan
1. Remove the front grille. (Refer to section 1)
2. Remove the cabinet. (Refer to section 2)
3. Remove the control box. (Refer to section 3)
4. Remove the 4 screws that fasten the brace.
5. Remove the brace.
6. Remove the 2 screws that fasten the evaporator.
7. Move the evaporator forward and pulling it upward
slightly. (See Figure 4)
8. Move the evaporator to the left carefully.
9. Remove the 2 terminals carefully. (See Figure 5,
at Electric heater Model)
10. Remove the 3 screws that fasten the Heater Cover.
(See Figure 5, at Electric Heater Model)
11. Remove the Heater cover. (See Figure 5, at
Electric Heater Model)
12. Pull out the hook of orifice by pushing the tabs
and remove it. (See Figure 6)
13. Remove the clamp with a hand plier that secures
the blower.
14. Remove the blower.
15. Remove the 4 screws that fasten the air guide
from the barrier.
16. Move the air guide backward, pulling out from
the base pan.
17. Re-install the components by referring to the
removal procedure, above.
5. FAN
1. Remove the cabinet. (Refer to section 2)
2. Remove the brace (Refer to section 4)
3. Remove the 4 screws that fasten the condenser.
4. Move the condenser to the left carefully.
5. Remove the clamp that secures the fan.
6. Remove the fan. (See Figure 7)
7. Re-install the components by referring to the removal
procedure, above.
Copyright © 2022-2023 LG Electronics Ins.
10
All right reserved.Only training and service purposes.
On/O
On/O
Fan
Cool
TIM ER
ENE RG
Heat
SAV ER
Y
MO DE
Figure 4
Figure 5
Figure 6
Figure 7
Advertisement
Table of Contents
