Focusing And Zooming Your Image; Adjusting The Image Shape - Epson PowerLite 1700c User Manual

Focusing and Zooming Your Image

Turn the focus ring on the projector to sharpen the image.
Turn the zoom ring on the projector to reduce or enlarge the image.
Focus Zoom
If the image still isn't large enough, you may need to move the
projector farther away from the screen. You can also use the
E-Zoom
buttons on the remote control to zoom in on a portion of the image.
See page 29 for instructions.

Adjusting the Image Shape

In most cases, you can maintain a square or rectangular image by
placing the projector directly in front of the center of the screen with
the base of the lens level with the bottom of the screen.
Even if the projector is slightly tilted (within a range of 30° up or
down), the projector has an automatic keystone correction function
that detects and corrects vertical keystone distortion.
Projector tilted up Corrected image Projector tilted down
It takes about one second after projection starts for the image to be
corrected. During this time, a vertical keystone correction gauge
appears on the screen.
If your image is still distorted, you can correct it using the Keystone
Keystone correction
buttons on the projector's control panel or the projector's Setting
menu.
Displaying and Adjusting the Image
21