Epson PowerLite 1700c User Manual page 52

caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times.
Fine-Tuning the Projector
52
You see this screen:
2. Use the pointer button to set
press .
Enter
3. Press
Esc.
4. Select and press
Password
5. When you see a message asking if you want to change the
password, select
Yes
6. Hold down the
Num
numeric keypad to enter a four digit password. (The default
setting is 0000.)
7. When you see a confirmation message, reenter the password.
Then press the
Menu
8. Press the button on the remote control to deactivate the
Num
numeric keypad.
9. If you want to disable the password temporarily, select
press . Then hold down the
Enter
numeric keypad to enter the number of hours (from 0 to 9999)
that you want the password feature disabled. If you want the
projector to request the password every time it is turned on, set
the timer to .
0H
The countdown for the elapsed time begins as soon as you close
the Password Protect menu. (You can check the elapsed time in
this menu next to
Power On Protect
.
Enter
and press .
Enter
button on the remote control and use the
button to exit the screen.
button while you use the
Num
.)
Time elapsed
to . Then
On
and
Timer