Troubleshooting; Adjust The Image; Where To Get Help; Using The Remote Control - Epson PowerLite 1220 Quick Setup

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the right.
2
To raise the image, press the foot release button
and lift the front of the projector. Release the
button to lock the foot in position.
3
Turn the focus ring to sharpen the image.
4
PowerLite S9: to reduce or enlarge
the image, press the Tele (reduce) or
Wide (enlarge) button on the
projector. You can also use the Zoom
option in the projector's Settings
menu. See the User's Guide on your
projector CD.
PowerLite 1220/1260: To reduce or enlarge the
image, turn the zoom ring.
5
If your image looks like
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
6
If your image looks like
projector to correct it.

Using the remote control

Make sure the batteries are installed as shown (two included AA batteries).
Turn projector
on and off
Turn off projector
display and sound
Change presentation
slides (USB
connection only)
Access projector
menus
For more information on using the remote control, see your User's Guide on
your projector CD.
or , you've placed the projector off to
or , press the or buttons on the
Choose which
source to display
Get solutions to
common problems
Control projector
volume
Navigate projector
menus

Troubleshooting

If you see a blank screen...
If you see a blank screen or the No signal message after turning on your
computer, check the following:
• Make sure the power light on the projector is green and not flashing,
and the A/V Mute slide is open.
• Press the Source Search button on the projector or the remote control
to select the computer as the image source.
• If you're using a Windows notebook, press the function key on your
keyboard that lets you display on an external monitor. It may be labelled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7).
• On a Macintosh, select the Mirror Displays setting in the System
Preferences Displays utility.

Where to get help

Manual
For more information about using the projector, install the User's Guide from
your projector CD.
Telephone Support Services
®
To use the Epson PrivateLine Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card included with your projector.
This service is available 6 to 6
AM PM
the duration of your warranty period. You may also speak with a projector
support specialist by dialing:
(562) 276-4394 (US), or (905) 709-3839 (Canada), 6
Monday through Friday.
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
Internet Support
Visit www.epson.com/support for solutions to common problems. You can
download utilities and documentation, get FAQs and troubleshooting advice,
or e-mail Epson.
Registration
Register today to get product updates, special promotions, and customer-only
offers. You can use the CD included with your projector, or register online at
www.epson.com/webreg.
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko
Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2010 Epson America, Inc. 5/10
Printed in XXXXXX
. You may have to hold down the
, Pacific Time, Monday through Friday, for
to 6 , Pacific Time,
AM PM
CPD-28031