Toro 78555 Operator's Manual page 18

Figure 29
1. Bagger hood
2. Upper tube
3. Drill 7/32 inch diameter
holes here (use upper tube
as a template)
13. Remove the lower tube from the blower.
14. Join the upper and lower tubes with 3 bolts (#10
x 3/4 inches), 3 flat washers (7/32 inch), and 3
locknuts (#10) as shown in
g003390
4. Lower tube
5. Blower assembly
Figure 30.
1. Lower tube
2. Upper tube
3. Flat washer (7/32 inch)
15. Install the lower tube onto the blower housing
and secure it with the latches.
16. Install the bags onto the bagger.
18
Figure 30
4. Locknut (#10)
5. Bolt (#10 x 3/4 inches)
g003392