Transporting - Unverferth ROLLING HARROW 1245 Manual

Pull-Type Rolling Harrow 1245/1245D

Transporting

• THE ROLLING HARROW IMPLEMENT WILL INCREASE THE OVERALL LENGTH OF
THE PRIMARY TILLAGE TOOL. USE EXTREME CAUTION WHEN TURNING TO AVOID
BYSTANDERS, OBSTACLES, ETC. REDUCE GROUND SPEEDS TO AVOID DAMAGE TO
ROLLING HARROW OR PRIMARY TILLAGE TOOL.
Before unit is transported, be sure the jackstand is in the "Transport Position" see "Jack
Assembly" in SET UP section.
• INSTALL HYDRAULIC CYLINDER TRANSPORT LOCKS BEFORE TRANSPORTING (FIG.
3-5).
Comply with all laws governing highway safety
and regulations when moving machinery on
public roads.
Be sure SMV Emblem is in place and clearly
visible on the rear of the implement. See SMV
Emblem in SET UP section.
• USE APPROVED ACCESSORY LIGHTS AND REFLECTORS WHEN TRANSPORTING AT
NIGHTS, DURING PERIODS OF POOR VISIBILITY, AND AS REQUIRED BY ALL LAWS.
Check with local authorities to insure lights and reflectors comply with local standards.
— Operation
FIG. 3-5
Transport
Lock
3-9