Universal emergency fitting self test, white (3 pages)
Summary of Contents for Robus R2WLEDNME-01
Page 1
2W LED NON MAINTAINED RECESSED EMERGENCY LIGHT R2WLEDNME-01 Please read instruction before commencing installation and retain for future reference. Speci cation: Model No. R2WLEDNME-01 Supply Voltage: 220-240V~50/60Hz Power Consumption : Lumen Output : 190lm Colour Temperature: 6000-7000K CRI: Beam angle : Operating temp Range : 0°C ~ +40°C...
Page 2
Testing: The emergency lighting must be inspected and tested regularly in accordance with local codes of practice: note: for safety reasons tests should be carried out during daylight hours. The minimum recommended test schedule is as follows: After installation, allow 24 hours to ensure full battery charge and then interrupt the supply;...
Page 3
Installation: ! Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent 1. Ensure mains supply is switched off before commencing work 2. Before cutting, ensure that the hole does not impinge on joists, pipe work, cables or other building services Connect box Y./G.
Need help?
Do you have a question about the R2WLEDNME-01 and is the answer not in the manual?
Questions and answers