Motorola solutions MTP3500 Feature User Manual
  1. Manuals
  2. Brands
  3. Motorola solutions Manuals
  4. Radio
  5. MTP3500
  6. Feature user manual

Motorola solutions MTP3500 Feature User Manual

Hide thumbs Also See for MTP3500:
Table of Contents

Advertisement

Quick Links

Download this manual
Mobile Release 2022.4
MTP3500 Feature User
Guide
JANUARY 2023
*MN001488A01*
MN001488A01-BR
2023 Motorola Solutions, Inc. All rights reserved
©

Advertisement

Table of Contents
loading

Related Manuals for Motorola solutions MTP3500

Summary of Contents for Motorola solutions MTP3500

  • Page 1 Mobile Release 2022.4 MTP3500 Feature User Guide JANUARY 2023 *MN001488A01* MN001488A01-BR 2023 Motorola Solutions, Inc. All rights reserved ©...

  • Page 2: Table Of Contents

    MN001488A01-BR Contents Contents List of Figures......................12 List of Tables......................13 Declaration of Conformity..................14 Safety Information.....................15 Notice to Users (FCC) ....................16 FCC Licensing Information......................16 Applying for Canadian License................17 Intellectual Property and Regulatory Notices............18 Chapter 1: General Information................19 1.1 Icon Conventions........................
  • Page 3 MN001488A01-BR Contents 2.10.1 Using High Audio....................35 2.10.2 Using Low Audio....................35 2.11 During a Call........................35 2.12 Selecting Talkgroups......................35 2.12.1 Talkgroup Icons Selection..................36 2.13 Entering TMO or DMO Mode....................37 2.14 Over The Air Programming....................37 2.15 One-Touch Buttons......................38 Chapter 3: Modes....................41 3.1 Trunked Mode Operation.......................41 3.1.1 Entering TMO Mode....................41 3.1.2 Making Group Calls in TMO..................41...
  • Page 4 MN001488A01-BR Contents 3.3.8.1 Enabling Network Monitor................49 3.3.9 Communication through Repeaters................. 49 3.3.10 Communication Through Gateways...............50 3.3.11 Gateway and Repeater Synchronization............... 51 3.4 Transmit Inhibit Mode......................51 3.5 Emergency Operations......................52 3.5.1 Emergency Alarm....................52 3.5.2 Emergency Group Call.....................53 3.5.2.1 Making Emergency Group Calls..............53 3.5.2.2 Receiving Emergency Group Calls............
  • Page 5 MN001488A01-BR Contents 4.3.2.6 Calling Numbers from Messages............... 67 4.3.2.7 Making Group Calls on the Talkgroup of the Message Sender....67 4.3.2.8 Immediate Text Message................67 4.3.3 Outbox........................68 4.3.4 Call-Out (CO) Box....................69 4.3.4.1 Call-Out Icons.................... 69 4.3.5 Wireless Application Protocol (WAP) Box..............69 4.3.6 Templates........................
  • Page 6 MN001488A01-BR Contents 4.5.4 Devices........................80 4.5.4.1 Connecting or Disconnecting Devices............80 4.5.4.2 Managing Devices..................80 4.5.5 Disconnecting All Devices..................81 4.5.6 Setting Indoor Location.................... 81 4.5.6.1 Viewing Detected Beacons................ 81 4.5.7 Connecting Firearms Devices..................82 4.6 Browser..........................82 4.7 Man Down (Fall Alert)......................82 4.7.1 Setting Man Down (Fall Alert)..................
  • Page 7 MN001488A01-BR Contents 4.9.2.1 Setting Ring Style..................90 4.9.3 Set Volume......................91 4.9.3.1 Setting Volume...................91 4.9.4 Language......................... 91 4.9.4.1 Setting Language..................91 4.9.5 Data Setup....................... 92 4.9.5.1 Setting Data Function.................92 4.9.6 Audio........................92 4.9.6.1 Audio Profiles..................... 92 4.9.6.2 Howling Suppression................. 93 4.9.6.3 Audio Toggle....................93 4.9.6.4 Volume Adjustment Mode................
  • Page 8 MN001488A01-BR Contents 4.9.11.1 Selecting RF Power................101 4.9.12 Accessory (Accry) Setup..................102 4.9.12.1 Selecting CORE/Other/Secondary Accessories........102 4.9.13 Book On....................... 102 4.9.14 Rotary Knob......................103 4.9.14.1 Setting Rotary Lock................103 4.9.14.2 Setting In Keypad Lock................103 4.9.14.3 Setting Rotary Knob Wrap Around............103 4.9.14.4 Setting Rotary Knob Scroll Range............
  • Page 9 MN001488A01-BR Contents 4.13 My Info..........................111 4.13.1 Viewing Personal Information................112 4.14 Recent Calls........................112 4.14.1 Viewing Recent Calls................... 112 4.14.2 Calling from Recent Calls..................113 4.14.3 Storing Recent Calls to Contacts................. 113 4.14.4 Deleting Recent Calls..................113 4.15 Networks..........................114 4.15.1 Selecting Network Operation Mode..............
  • Page 10 MN001488A01-BR Contents Chapter 5: Features....................123 5.1 Ambience Listening (AL) Call....................123 5.2 Bluetooth..........................123 5.2.1 Bluetooth Interactions.................... 124 5.2.2 Discoverable Mode....................124 5.2.3 Add Bluetooth Devices...................124 5.2.4 Bluetooth Smart Proximity Pairing................. 125 5.2.5 Bluetooth Sensor Data...................125 5.3 Buffer Full Overwrite Policy....................125 5.4 Call-Out..........................126 5.4.1 Types of Call-Out Alerts..................126 5.4.2 Call-Out Modes Interaction..................
  • Page 11 MN001488A01-BR Contents 5.18.1 WAP Browser.......................137 5.18.2 Entering the Browser................... 137 5.18.3 Entering Browser Menu Panes................137 5.18.4 Tips for Browsing....................138 5.18.4.1 Creating Bookmarks through the Navigate Pane........138 5.18.4.2 Creating Bookmarks through the Bookmarks Pane....... 138 5.18.4.3 Using Bookmarks................... 138 5.18.4.4 Saving Pages..................

  • Page 12: List Of Figures

    MN001488A01-BR List of Figures List of Figures Figure 1: Charger Mode Screen......................23 Figure 2: MTP3x00 Series Controls and Indicators................24 Figure 3: Default Home Screen with Icons..................... 29 Figure 4: Trunked Mode Operation......................41 Figure 5: Direct Mode Operation......................46 Figure 6: Communication through Repeaters..................50 Figure 7: Communication Through Gateways..................

  • Page 13: List Of Tables

    MN001488A01-BR List of Tables List of Tables Table 1: Special Notations........................19 Table 2: Battery Icons..........................23 Table 3: MTP3x00 Series Controls and Indicators................. 24 Table 4: Text Entry Screen Icons......................26 Table 5: Keys Usage..........................27 Table 6: Display............................29 Table 7: Colors of the Soft Key Area...................... 29 Table 8: Status Icons..........................30 Table 9: During the Call..........................35 Table 10: Talkgroup Icons........................

  • Page 14: Declaration Of Conformity

    Name: Motorola Solutions, Inc. Address: 2000 Progress Pkwy, Schaumberg II, 60196. Phone Number: 1-800-927-2744 Hereby declares that MTP3500 conforms to FCC Part 15, subpart B, section 15.107(a), 15.107(d), and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is...

  • Page 15: Safety Information

    Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. For a list of Motorola Solutions-approved antennas, batteries, and other accessories, visit the following website: http://www.motorolasolutions.com Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.

  • Page 16: Notice To Users (Fcc)

    The device must accept any interference received, including interference that may cause undesired operation. • Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment. FCC Licensing Information This device complies with Parts 90 and 15 of the Federal Communications Commission (FCC) Rules.

  • Page 17: Applying For Canadian License

    Applying for Canadian License Applying for Canadian License The operation of your Motorola Solutions radio is subject to the Radio communications Act and must comply with rules and regulations of the Federal Government's department of Industry Canada. Industry Canada requires that all operators using Private Land Mobile frequencies obtain a radio license before operating their equipment.

  • Page 18: Intellectual Property And Regulatory Notices

    License Rights The purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.

  • Page 19: Chapter 1: General Information

    MN001488A01-BR General Information Chapter 1 General Information Icon Conventions The documentation set is designed to give the reader more visual clues. The following graphic icons are used throughout the documentation set. DANGER: The signal word DANGER with the associated safety icon implies information that, if disregarded, will result in death or serious injury.

  • Page 20: Chapter 2: Getting Started

    MN001488A01-BR Chapter 2 : Getting Started Chapter 2 Getting Started Familiarize yourself with basic information on how to use the radio. NOTE: MR19 is the highest release for Sales Model Number H62PCF6TZ8AN. MR2022.3.1 is the lowest release for Sales Model Number H62PCF6TZ8BN. Before Power On Read this section before you power on your radio for the first time.

  • Page 21: Inserting The Sim Card

    MN001488A01-BR Chapter 2 : Getting Started 2.1.2 Inserting the SIM Card NOTE: MTP3500 800MHz and MTP3550 800 MHz are not fitted with a SIM latch. Prerequisites: Turn off your radio before inserting the SIM card. Procedure: 1 Remove the battery.

  • Page 22: Installing The Battery

    IMPORTANT: Use only Motorola Solutions approved-chargers which provide optimal performance. Using other chargers may fail to fully charge, or reduce the life of the battery. Do not charge the battery in a hazardous area.

  • Page 23: Battery Charging Indications

    MN001488A01-BR Chapter 2 : Getting Started NOTE: If a multi-unit charger LED indicates an error (blinking red light) when radio is inserted and being charged, re-insert the radio. If the light is still red after several reconnections to MUC, the battery may be damaged or reached its end of life. Postrequisites: The battery may heat up during charging.

  • Page 24: Figure 2: Mtp3X00 Series Controls And Indicators

    MN001488A01-BR Chapter 2 : Getting Started Figure 2: MTP3x00 Series Controls and Indicators Table 3: MTP3x00 Series Controls and Indicators Annotation Description Talkgroup Knob Rotate to select a different talkgroup.
  • Page 25 MN001488A01-BR Chapter 2 : Getting Started Annotation Description Volume Knob Rotate to set the volume. Top Microphone Activated during Simplex, high audio calls such as Group Calls. Programmable Side button Programmable button, by default, the upper Programmable Side button is set to the Flip Display feature and the lower Programmable Side button is set to the Hi/Low Audio feature.

  • Page 26: Powering On The Radio

    MN001488A01-BR Chapter 2 : Getting Started Annotation Description On/Off/End/Home key • Press and hold to turn on/off your radio. • Press to end calls. • Press to return to the home screen. NOTE: If a message or notification is displayed on the radio and the Screen Saver activates, pressing On/Off/End/Home only de- activates the Screen Saver.

  • Page 27: Keys Usage

    MN001488A01-BR Chapter 2 : Getting Started Icons Description A-Z – all capitals a-z – no capitals Enter numbers and symbols: 0-9 # § ¡ ¿ ^ ~ \ } { ] [ ¤ ¥ $ £ € > < = * × % & + ; _ : / ) ( - ” ’ @ ! ? , .

  • Page 28: Unlocking Your Radio

    MN001488A01-BR Chapter 2 : Getting Started 2.5.1 Unlocking Your Radio Writing Text on page 26 for text entry method on your radio. Prerequisites: Radio displays Unit Locked Enter Code. Procedure: 1 Enter the PIN code at the prompt. NOTE: For radios with general PIN authentication, the PIN length is a fixed 4-digit code. For radios with BSI PIN authentication, the PIN length is configurable by your service provider up to a maximum of 8-digit code.

  • Page 29: Configurable Idle Screen

    MN001488A01-BR Chapter 2 : Getting Started Figure 3: Default Home Screen with Icons Home Mode Network Range Options Contcs Table 6: Display Annotation Description Status icon area Text display area Soft key area Menu/Context sensitive icon The color of the Soft key area changes according to the mode the radio is in. Table 7: Colors of the Soft Key Area Color Mode or State...

  • Page 30: Status Icons

    MN001488A01-BR Chapter 2 : Getting Started • Operational-Tactical Address (OPTA) • Radio Status • Range • RMS/FMS • RMS messages • Scan List Alias • Secondary Talkgroup Alias • Talkgroup Alias • Time and Date Order and visibility of these items are also subject of the Configurable Idle Screen settings. Status Icons Status icons appear when your radio is engaged in certain activities or when you have activated certain features.
  • Page 31 MN001488A01-BR Chapter 2 : Getting Started Icon Description Direct Mode Call – Indicates that the radio is receiving a Direct Mode call. The more bars, the stronger the signal. High RF Power: idle or transmitting – Indicates High RF Power option is enabled and the radio is either in idle mode or is transmitting a call.
  • Page 32 MN001488A01-BR Chapter 2 : Getting Started Icon Description • Blinking – the radio is acquiring a location fix. This feature is an optional setting and may not be enabled on your radio. Battery Strength – Shows the charge of your battery. Battery Charging –...
  • Page 33 MN001488A01-BR Chapter 2 : Getting Started Icon Description Encryption Off Blinking – Indicates that the SIM Card E2EE is disabled in DMO and TMO Modes. SIM End-to-End Encryption (E2EE) in TMO Indicates that the SIM Card E2EE is enabled in TMO Mode. SIM End-to-End Encryption (E2EE) in DMO Indicates that the SIM Card E2EE is enabled in DMO Mode.

  • Page 34: Holding Your Radio

    MN001488A01-BR Chapter 2 : Getting Started Holding Your Radio Your radio has two microphones: a top microphone for simplex dispatcher/private calls and a bottom microphone for duplex telephone-like calls. The radio is also equipped with an internal speaker for high audio (located at the middle of the unit) and an internal earpiece for low audio (located at the top of the unit).

  • Page 35: Using High Audio

    MN001488A01-BR Chapter 2 : Getting Started • Speaker LOW – indicates that audio is routed to the earpiece or PHF earpiece, and not to the main speaker. 2.10.1 Using High Audio When and where to use: Placing or receiving a Phone, PABX, or Duplex Private call. Procedure: 1 Hold your radio in a vertical position with its top microphone 5 cm to 10 cm away from your mouth.

  • Page 36: Talkgroup Icons Selection

    MN001488A01-BR Chapter 2 : Getting Started • Select Options→TG by Folder. Select a folder (for example, Favorite) and then a talkgroup name. NOTE: Your radio can access up to three levels of the folder structure. • Rotate Talkgroup Knob until the required talkgroup name is displayed. 2.12.1 Talkgroup Icons Selection Talkgroup icons are used to indicate that a talkgroup has a special function, show the status of network...

  • Page 37: Entering Tmo Or Dmo Mode

    MN001488A01-BR Chapter 2 : Getting Started Icon Talkgroups in Common Folders Talkgroups in Favorite Folders In TMO Mode In TMO Mode Display when TMO ISI talkgroup se- Display when TMO ISI talkgroup se- lected is not assigned to home net- lected is not assigned to home net- work.

  • Page 38: One-Touch Buttons

    MN001488A01-BR Chapter 2 : Getting Started Procedure: 1 Select Yes to accept or No to reject the new configuration update. NOTE: A timer is set when the prompt is displayed. Request is automatically rejected if there is no user response to the prompt when the timer runs out. When the OTAP installation prompt is accepted, your radio updates with the new configuration as received over OTAP.
  • Page 39 MN001488A01-BR Chapter 2 : Getting Started Feature Description Location Information Pro- Sends a message with the location of the radio to a dedicated ad- tocol (LIP) Report dress. Lock to Current Network Selects the current network only. Phone and Private Auto- Initiates a PABX call to a predefined entry in the contact list.
  • Page 40 MN001488A01-BR Chapter 2 : Getting Started Feature Description Toggle Bluetooth Discov- Turns Discoverable Mode on or off. erable Mode Toggle Bluetooth GATT Toggles Bluetooth GATT Sensor MMI Alerts on or off. Sensor MMI Alerts Toggle BSI Encryption En- Enables or disables BSI encryption. abled or Disabled Toggle Call Forwarding Toggles Call Forwarding on or off.

  • Page 41: Chapter 3: Modes

    MN001488A01-BR Modes Chapter 3 Modes This chapter contains information on available modes that the radio can operate in. Trunked Mode Operation Trunked Mode Operation (TMO) requires the switching and management infrastructure. TMO enables various voice and data communication types. Examples are group calls and short data service messages.

  • Page 42: Receiving Group Calls In Idle

    MN001488A01-BR Chapter 3 : Modes 2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the PTT button to listen. 3.1.3 Receiving Group Calls in Idle Procedure: 1 Your radio receives a Group Call. NOTE: The incoming Group Call is signaled by a Receiving Group Call tone.

  • Page 43: Preempting Group Calls

    MN001488A01-BR Chapter 3 : Modes 3.1.5.1 Preempting Group Calls NOTE: Your radio can only support either the D-PTT Tone feature or D-PTT Preempt Group Call feature at a time. Procedure: 1 Your radio receives a Group Call. 2 Press the PTT button twice on the radio or the Remote Control Unit (RCU). Call preempt is triggered.

  • Page 44: Dgna Auto Reselect Group

    MN001488A01-BR Chapter 3 : Modes 3.1.6.3 DGNA Auto Reselect Group DGNA Auto Reselect allows your radio to return to the previous selected talkgroup. Your network operator assigns a talkgroup to your radio through DGNA. When the assigned talkgroup is deassigned, your radio automatically returns to the previous talkgroup.

  • Page 45: Call Modification

    MN001488A01-BR Chapter 3 : Modes 3.1.9 Call Modification Call Modification is a feature that allows your service provider to modify the call to optimize it and adjust to a current situation. Modification can cover: Call priority Modified during call setup. Call type Modified during call setup.

  • Page 46: Exiting Local Site Trunking

    MN001488A01-BR Chapter 3 : Modes • Attachment • Group Call • Emergency Operations NOTE: Your service provider can turn on/off all visual and audio indications, when you enter Local Site Trunking Mode. 3.2.2 Exiting Local Site Trunking When the link with the central network controller is reestablished, your radio exits Local Site Trunking, and the following occurs: •...

  • Page 47: Making Group Calls In Dmo

    MN001488A01-BR Chapter 3 : Modes 3.3.2 Making Group Calls in DMO The Group Call is received by all members of the selected group who have their units turned on and are in range. Procedure: 1 Press and hold the PTT button. 2 Wait for the Talk Permit tone (if configured) and then speak into the microphone.

  • Page 48: Selecting Dmo Communications Options

    MN001488A01-BR Chapter 3 : Modes 3.3.5 Selecting DMO Communications Options When and where to use: Helps to communicate with other radio users on the same talkgroup through the Gateway or Repeater. Procedure: 1 From the home screen, press Options. 2 Press Config. 3 Select one of the following options: •...

  • Page 49: Network Monitor

    MN001488A01-BR Chapter 3 : Modes • Rejects the call • Plays a tone • Displays the Individual Calls Only message 3.3.8 Network Monitor NOTE: This is a Software Selling Feature. This feature allows the radio to monitor for Trunked Mode Operation (TMO) individual calls while maintaining Direct Mode Operation (DMO) services.

  • Page 50: Communication Through Gateways

    MN001488A01-BR Chapter 3 : Modes Figure 6: Communication through Repeaters When the radio detects a potential repeater signal or connects to a repeater, it plays a tone, displays the Repeater available message, and shows an appropriate icon. When the radio loses connection with the repeater, it plays a tone, displays the Repeater not available message, and the repeater icon is blinking.

  • Page 51: Gateway And Repeater Synchronization

    MN001488A01-BR Chapter 3 : Modes Radio behavior when radio detects a potential repeater signal or connects to a gateway: • Radio sounds a tone sounds. • Radio displays Gateway available. • Radio displays an appropriate icon. Radio behavior when radio loses connection with the gateway: •...

  • Page 52: Emergency Operations

    MN001488A01-BR Chapter 3 : Modes • Messages - stored in the Inbox • Private call attempts - stored in the Missed Calls list, without the option to respond When no danger to safety exists anymore, for example, when you leave the RF sensitive area, you can deactivate the TXI Mode and the radio returns to standard operation.

  • Page 53: Emergency Group Call

    MN001488A01-BR Chapter 3 : Modes Your radio sends the message each time it enters Emergency Operation. An audible tone sounds for a successfully sent message. To resend the message, press the Emergency button. NOTE: During Hot Microphone transmission, your radio is not allowed to resend the message. 3.5.2 Emergency Group Call The Emergency Group Call has the highest communication priority and it is a pre-emptive call.

  • Page 54: Non-Tactical Emergency

    MN001488A01-BR Chapter 3 : Modes 3.5.3 Non-Tactical Emergency In Non-Tactical Emergency, your radio switches to a designated Emergency talkgroup when starting Emergency Operations. This talkgroup is used for the complete duration of the Emergency Operation. Changing talkgroups is not allowed at this point. In Trunked Mode Operation (TMO), your radio can make Emergency Non-Tactical Group Calls without sending attachments.

  • Page 55: Alternating Hot Microphone

    MN001488A01-BR Chapter 3 : Modes Pressing End soft key or End key ends the Hot Microphone operation. 3.5.7 Alternating Hot Microphone The Alternating Hot Microphone is an enhancement of the Hot Microphone. After activation, the radio alternately enters transmission phases (your microphone is active) and reception phases (you can only listen) for an amount of time precisely determined by your service provider.

  • Page 56: Invisible Emergency

    MN001488A01-BR Chapter 3 : Modes Mode. On turning the radio on during the pseudo power off state, the radio acts as during turning on and still is in the Silent Emergency Mode. 3.5.9 Invisible Emergency Your service provider can disable visual and audible indications on the radio in Emergency Operation. This feature is called Invisible Emergency.

  • Page 57: Emergency Mode By Dialing

    MN001488A01-BR Chapter 3 : Modes 3.5.11 Emergency Mode by Dialing This feature allows you to trigger Emergency Mode by dialing a predefined number. It initiates the same emergency services as when you use the Emergency button. Your radio can store up to eight emergency numbers.

  • Page 58: Exiting Emergency Operations

    MN001488A01-BR Chapter 3 : Modes • Emergency Call • Emergency Short Data Service (SDS) Status • Location Information Protocol reports 3.5.14 Exiting Emergency Operations Prerequisites: Make sure that your radio is engaged in Emergency Operations. Procedure: Perform one of the following actions: •...

  • Page 59: Chapter 4: Main Menu

    MN001488A01-BR Main Menu Chapter 4 Main Menu This chapter contains information on items in the main menu. You can enter the menu items during a call. If not programmed otherwise by your service provider the radio exits the menu, when a new call starts. IMPORTANT: Some menu items are model-specific and may not be activated or available on your radio.

  • Page 60: Messages

    MN001488A01-BR Chapter 4 : Main Menu Menu Icon Description Setup Allows you to customize your radio. Group Setup Contains additional menu items for Scanning Talkgroups features. Favorites Contains shortcuts to frequently used talkgroups and contact numbers. My Info Displays information about your radio and its numbers. Recent Calls Contains a list of recent calls.

  • Page 61: New Message

    MN001488A01-BR Chapter 4 : Main Menu 4.3.1 New Message This menu item allows you to create a new message. NOTE: While editing a text, Status Icons change their appearance and only four of them are displayed: Tower, Signal Strength, Emergency, and Battery. The text.| Send Delete...

  • Page 62: Delivery Report

    MN001488A01-BR Chapter 4 : Main Menu Procedure: 1 From the home screen, press the Menu key. 2 Select Messages→New Message. 3 Press the Menu key and select Message Setup→On/Offline users. 4 Enter your message and press Send. 5 Select one of the following options: •...
  • Page 63 MN001488A01-BR Chapter 4 : Main Menu • Temporarily saves the Delivery Report message in the Inbox. The notification disappears after it is read. • Displays the New Message icon. • Displays the New Delivery Status notification screen (if possible). 4.3.1.4.1 Viewing Delivery Reports Procedure: 1 From the home screen, press the Menu key.

  • Page 64: Inbox

    MN001488A01-BR Chapter 4 : Main Menu 4.3.2 Inbox The inbox folder contains up to 100 new or old incoming messages, depending on the length of the messages. The Messages sub-menu indicates the number of the messages. For example, if the indication is 2/4, it means that two unread and four read messages are in the inbox.

  • Page 65: Using Submenus In Inbox And Outbox

    MN001488A01-BR Chapter 4 : Main Menu 2 Select Messages→Inbox. The radio displays the status of the inbox for a few seconds (if any): • No New or Old Messages • Inbox Full 4.3.2.3 Using Submenus in Inbox and Outbox Procedure: 1 From the home screen, press the Menu key.

  • Page 66: Embedded Number

    MN001488A01-BR Chapter 4 : Main Menu Option Actions • Select Send. • Press the PTT button. • Press the Send key. Refreshing the list of messages to display Select Refresh. new messages Displaying the date and time of the message Select Delivery Status.

  • Page 67: Calling Numbers From Messages

    MN001488A01-BR Chapter 4 : Main Menu 7 Highlight required contact and press View. NOTE: To store a number for a new contact, select [New Contact] and fill out the required fields. Press Done to save it. 8 Select Edit. 9 Choose the Type of the new number and press Done. 4.3.2.6 Calling Numbers from Messages The Embedded Number feature is enabled by your service provider.

  • Page 68: Outbox

    MN001488A01-BR Chapter 4 : Main Menu When you receive a new immediate text message, the radio plays the New Mail Received tone. All immediate text messages are stored in the Inbox folder. If the radio is in the PIN Lock state, immediate text message is displayed after you enter the correct PIN.

  • Page 69: Call-Out (Co) Box

    MN001488A01-BR Chapter 4 : Main Menu Icon Description Failed Outgoing Protected Message 4.3.4 Call-Out (CO) Box CO Box contains incoming and outgoing Call-Out messages. Clicking Select on a Call-Out message headline displays more detailed information on the item. When the radio is in normal mode, you are able to browse through all messages in the CO Box. However, if the radio is in the Call-Out mode, you can only browse through the information regarding the currently ongoing Call-Out message.

  • Page 70: Sending User-Defined Templates

    MN001488A01-BR Chapter 4 : Main Menu 4.3.6.1 Sending User-Defined Templates Procedure: 1 From the home screen, press the Menu key. 2 Select Messages→Templates. 3 Highlight the required template name and press Send. 4 Send the message by using one of the following options: Option Actions Sending the message to a talkgroup...

  • Page 71: Predefined Templates

    MN001488A01-BR Chapter 4 : Main Menu 4.3.7 Predefined Templates Predefined message templates are programmed into your radio. You are allowed to perform limited edit operations on the predefined template. You can send it, but you cannot store the edited template or erase it from the predefined template list. 4.3.7.1 Viewing Predefined Templates Procedure:...

  • Page 72: Sending Status Messages

    MN001488A01-BR Chapter 4 : Main Menu 4.3.8.2 Sending Status Messages You can send status messages to either a selected talkgroup or a programmed private number. Only one option can be enabled at a time. Prerequisites: • If sending statuses to talkgroups is enabled, switch to the talkgroup to which you want to send a status message.

  • Page 73: Additional Address

    MN001488A01-BR Chapter 4 : Main Menu Prerequisites: This feature is only available when enabled by your service provider. See Radio Messaging System (RMS) on page 134 for details. Procedure: 1 Perform one of the following actions: • From the home screen, press Menu→Messages→Send RMS/FMS. •...

  • Page 74: Viewing Additional Address

    MN001488A01-BR Chapter 4 : Main Menu 4.3.10.3 Viewing Additional Address Procedure: 1 From the home screen, press the Menu key. 2 Select Messages→Additional Address→Select Address. 3 Scroll to select the alias of the Additional Address you wish view. 4 Press the Menu key. 5 Select one of the following options: •...

  • Page 75: Deleting Additional Address

    MN001488A01-BR Chapter 4 : Main Menu 4.3.10.6 Deleting Additional Address Prerequisites: Deleting Additional Address is allowed only for User-Defined positions. Pre-Defined positions can only be Selected and Viewed. Procedure: 1 From the home screen, press the Menu key. 2 Select Messages→Additional Address→Select Address. 3 Scroll to select the alias of the Additional Address you wish delete.

  • Page 76: Creating Contacts

    MN001488A01-BR Chapter 4 : Main Menu Contact Icon Description Home Work PABX Other Pickers Indicate more than one number in a contact. # (number) Each contact entry must contain a number. Speed # Shows the default Speed Dial number. You can accept or change it. Simplex (Private only) Shows the hook method for simplex calls.

  • Page 77: Editing Contacts

    MN001488A01-BR Chapter 4 : Main Menu 4.4.2 Editing Contacts Procedure: 1 From the home screen, press Contcs. 2 Select the contact you want to edit. 3 Press the Menu key. 4 Press Edit. 5 Select one of the following entries and press Change to edit it: •...

  • Page 78: Checking Capacity

    MN001488A01-BR Chapter 4 : Main Menu 4.4.5 Checking Capacity When and where to use: To see how many numbers are stored in the radio. Procedure: 1 From the home screen, press Contcs. 2 Press the Menu key. 3 Select Capacity. 4 Select one of the following options: •...

  • Page 79: Enabling And Disabling Bluetooth

    NOTE: This setting does not affect the Motorola Solutions headset with PTT (NNTN8143_ or NNTN8191_) as it is always in the GC Optimized mode.

  • Page 80: Devices

    MN001488A01-BR Chapter 4 : Main Menu 4.5.4 Devices This menu item lists all devices paired with your radio and allows you to perform the following operations: • Connect a device. • View and change device details. • Disconnect a device. •...

  • Page 81: Disconnecting All Devices

    MN001488A01-BR Chapter 4 : Main Menu • Delete – deletes the device from the paired devices lists. 4.5.5 Disconnecting All Devices When and where to use: To disconnect all remote devices connected to your radio. Procedure: 1 From the home screen, press the Menu key. 2 Select Bluetooth→Disconnect All.

  • Page 82: Connecting Firearms Devices

    MN001488A01-BR Chapter 4 : Main Menu 4.5.7 Connecting Firearms Devices Prerequisites: Only pre-approved firearms devices can be used. The service provider is responsible for configuring the radio to work with specific devices. See Add Bluetooth Devices on page 124. When and where to use: To select a firearm sensor device for Bluetooth connection. Procedure: 1 From the home screen, press the Menu key.

  • Page 83: Setting Man Down (Fall Alert)

    MN001488A01-BR Chapter 4 : Main Menu 4.7.1 Setting Man Down (Fall Alert) Procedure: 1 From the home screen, press the Menu key. 2 Select Man Down (henceforth known as Fall Alert). 3 Select one of the following options: • On – Activates the feature. •...

  • Page 84: Changing Pin Codes

    MN001488A01-BR Chapter 4 : Main Menu 4.8.1.2 Changing PIN Codes NOTE: This feature is only available when enabled by your service provider. Procedure: 1 From the home screen, press the Menu key. 2 Select Security→Change Code. 3 Radio prompts for the Old Code. NOTE: To increase security, set your own PIN code.

  • Page 85: Setting Keylock On Startup

    MN001488A01-BR Chapter 4 : Main Menu 4.8.2.3 Setting Keylock on Startup Procedure: 1 From the home screen, press the Menu key. 2 Select Security→Keylock Setup→Start Locked. 3 Select On or Off. 4.8.3 Air Encryption NOTE: This is a Software Selling Feature. This menu item allows you only to view air encryption state.

  • Page 86: K Validity

    MN001488A01-BR Chapter 4 : Main Menu 4.8.4 K Validity Key (K) is a secret key the infrastructure uses to authenticate the radio in the system. It is part of the authentication that provides service confidentiality between your radio and the system. 4.8.4.1 Verifying K Validity Procedure:...

  • Page 87: Dmo Sck

    MN001488A01-BR Chapter 4 : Main Menu 4.8.5.2 DMO SCK Your service provider can enable SCKs in DMO. The SCKs used in DMO are called DMSCKs. 4.8.5.2.1 Verifying DMSCK Validity When and where to use: To ensure that the DMSCKs in the radio are valid and can be used for the air interface encryption.

  • Page 88: Activating Covert Mode

    MN001488A01-BR Chapter 4 : Main Menu • All tones are set to Off (corresponding to All Tones menu entry). • Group audio is set to Spkr Cntrl (corresponding to Audio Toggle menu entry). • The private speaker is set to Off (this setting causes all the calls are routed through the earpiece). •...

  • Page 89: Sds Remote Control

    MN001488A01-BR Chapter 4 : Main Menu Play loud tone until user interaction The radio plays a loud tone as in the Man Down (henceforth known as Fall Alert) feature until you unlock the keypad (if needed) and press the appropriate soft key labeled Exit. The tone is played through the speaker even if an accessory is attached.

  • Page 90: Vibrate

    MN001488A01-BR Chapter 4 : Main Menu 4.9.1 Vibrate This sub-menu allows you to determine if your radio vibrates, or rings, or vibrates and then rings when receiving a call. 4.9.1.1 Setting Default Vibrate Procedure: 1 From the home screen, press the Menu key. 2 Select Setup→Vibrate.

  • Page 91: Set Volume

    MN001488A01-BR Chapter 4 : Main Menu • Duplex – To set the new ring style to all duplex calls. • Simplex – To set the new ring style to all simplex calls. • DMO Simplex – To set the new ring style to all Direct Mode Operation (DMO) simplex calls. NOTE: Upon entry into this sub-menu, the display shows the current ring style used.

  • Page 92: Data Setup

    MN001488A01-BR Chapter 4 : Main Menu 2 Select Setup→Language. 3 Select desired language. 4.9.5 Data Setup This menu item allows you to set up your radio to transmit and receive data from the external device. To connect your radio accessory connector to the external device, use the PMKN4124 (for E2E KVL) or PMKN4127 (for AIE and Authentication KVL) cable.

  • Page 93: Howling Suppression

    MN001488A01-BR Chapter 4 : Main Menu 4.9.6.1.1 Setting Audio Profiles When and where to use: To adjust the audio parameters of the radio in its current operating environment. Procedure: 1 From the home screen, press the Menu key. 2 Select Setup→Audio→Audio Profile. 3 Select a required profile.

  • Page 94: Volume Adjustment Mode

    MN001488A01-BR Chapter 4 : Main Menu 4.9.6.4 Volume Adjustment Mode You can set the volume to Individual or Common. When set to Common, the audio has one setting for all items. When set to Individual, the volume level for the following options can be set per user preferences. •...

  • Page 95: All Tones

    MN001488A01-BR Chapter 4 : Main Menu 2 Select Setup→Tones→Keypad Tone. 3 Select one of the following options: • On – Activates keypad tone. • Off – Deactivate keypad tone. 4.9.7.2 All Tones You can activate/deactivate all tones. 4.9.7.2.1 Setting All Tones Procedure: 1 From the home screen, press the Menu key.

  • Page 96: Periodic Alert

    MN001488A01-BR Chapter 4 : Main Menu • Tone On – Activate clear to send tone. • Tone Off – Deactivates clear to send tone. 4.9.7.5 Periodic Alert You can activate/deactivate periodic tone indication for the missed calls, the unread messages, and low battery level.

  • Page 97: Setting Flip Display

    MN001488A01-BR Chapter 4 : Main Menu 4.9.8.1 Setting Flip Display When and where to use: The feature is useful for a user who has to wear the radio on a shoulder, belt, or lapel and at the same time wishes to read the display upside down. Procedure: 1 From the home screen, press the Menu key.

  • Page 98: Setting Backlight

    MN001488A01-BR Chapter 4 : Main Menu • Activate – To activate or deactivate this feature. Select one of the following sub-options: • Auto – Automatically displays the screen saver when the radio is inactive for a pre- determined period. • Disabled –...

  • Page 99: Setting Wallpaper

    MN001488A01-BR Chapter 4 : Main Menu • 2 minutes – Turns off the radio display after 2 minutes. • 5 minutes – Turns off the radio display after 5 minutes. • 15 minutes – Turns off the radio display after 15 minutes. •...

  • Page 100: Setting The Date Format

    MN001488A01-BR Chapter 4 : Main Menu 4.9.9.3 Setting the Date Format Procedure: 1 From the home screen, press the Menu key. 2 Select Setup→Time & Date→Format→Format Date. 3 Select (D – day, M – month, Y – year): • DD/MM/YY •...

  • Page 101: Energy Economy

    MN001488A01-BR Chapter 4 : Main Menu 4.9.10 Energy Economy Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all downlink time slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode is not needed.

  • Page 102: Accessory (Accry) Setup

    MN001488A01-BR Chapter 4 : Main Menu • Normal RF Pwr – Deactivates this feature. NOTE: • Changing RF Power Class to Normal RF Pwr during calls may result in dropping the call. The power level may be not sufficient to sustain the transmission. •...

  • Page 103: Rotary Knob

    MN001488A01-BR Chapter 4 : Main Menu 4.9.14 Rotary Knob This menu item allows you to set all the related functionality of the Volume Knob and Talkgroup Knob. 4.9.14.1 Setting Rotary Lock Procedure: 1 From the home screen, press the Menu key. 2 Select Setup→Rotary Knob→Rotary Lock.

  • Page 104: Setting Rotary Knob Scroll Range

    MN001488A01-BR Chapter 4 : Main Menu 4.9.14.4 Setting Rotary Knob Scroll Range Procedure: 1 From the home screen, press the Menu key. 2 Select Setup→Rotary Knob→Scroll Range. 3 Select one of the following options: • Stay In Range – Scrolling through the talkgroups in the current folder only. •...

  • Page 105: Selecting Default Setting

    MN001488A01-BR Chapter 4 : Main Menu 4.9.15.1 Selecting Default Setting Procedure: 1 From the home screen, press the Menu key. 2 Select Setup→Def. Settings. Your radio display Reset to def. settings?. Press Yes to confirm. 4.10 Group Setup This menu item allows you to set the operation parameters, scanning and my groups folder. 4.10.1 Setting Operations Parameters When and where to use: If you want to define the radio mode and the talkgroup at the radio startup,...

  • Page 106: Standard Home Group

    MN001488A01-BR Chapter 4 : Main Menu 4.10.1.1 Standard Home Group This menu item allows you to configure the standard home group to be used during start up and when changing modes: TMO → DMO and TMO → Repeater. 4.10.2 Scan This menu item allows you to activate/deactivate scanning, view the active scan list, and edit the scan lists.

  • Page 107: Deleting Talkgroups From Scan Lists

    MN001488A01-BR Chapter 4 : Main Menu 2 Select Group Setup→Scan→Scan Lists. 3 Highlight required scan list and press Menu to see additional settings: • Capacity – Displays the number of assigned and unassigned talkgroups for the scan list. • Clear – Deletes all the talkgroup assigned to that scan list. •...

  • Page 108: Deleting Talkgroup From Favorite Folders

    MN001488A01-BR Chapter 4 : Main Menu 3 Highlight a required favorite folder. 4 Press the Menu key. 5 Select Delete Folder. Press Yes to confirm deletion. NOTE: You cannot delete the last favorite folder. 4.10.3.4 Deleting Talkgroup from Favorite Folders Procedure: 1 From the home screen, press the Menu key.

  • Page 109: Favorites

    MN001488A01-BR Chapter 4 : Main Menu • Config Sending – Enable or disable call forwarding. Select On to enable call forwarding. • Config – Set predefined condition messages for calling radio. You can select more than one messages: • Always •...

  • Page 110: Adding Talkgroups To Favorites

    MN001488A01-BR Chapter 4 : Main Menu • Go to Options→TG by Folder, select the required favorite folder, and highlight the contact number. 2 Use one of the following options: Option Actions Making simplex calls in TMO or DMO a Press and hold the PTT button. b Wait for the Talk Permit tone before talk- ing.

  • Page 111: Deleting Folders In Favorites

    MN001488A01-BR Chapter 4 : Main Menu 4.12.6 Deleting Folders in Favorites Procedure: 1 From the home screen, press the Menu key. 2 Select Favorites. 3 Highlight a required folder. 4 Press the Menu key. 5 Select Delete Folder. 6 Confirm the deletion by pressing Yes. NOTE: You cannot delete the last favorite folder or a folder that contains at least one non-erasable item.

  • Page 112: Viewing Personal Information

    MN001488A01-BR Chapter 4 : Main Menu 4.13.1 Viewing Personal Information Procedure: 1 From the home screen, press the Menu key. 2 Select My Info. 3 Select one of the following options: • My Private Num – displays your radio private number. •...

  • Page 113: Calling From Recent Calls

    MN001488A01-BR Chapter 4 : Main Menu 4.14.2 Calling from Recent Calls Procedure: 1 From the home screen, press the Menu key. 2 Select Recent Calls. 3 Select one of the following options: • Dialed (from the home screen press Send key to access Dialed Calls list) •...

  • Page 114: Networks

    MN001488A01-BR Chapter 4 : Main Menu 3 Select one of the following options: • Dialed • Received • Missed 4 Highlight the required call and press Menu. 5 Select Delete. NOTE: To erase all the calls, select Delete All. 4.15 Networks This is a Software Selling Feature.

  • Page 115: Network Select

    MN001488A01-BR Chapter 4 : Main Menu 4.15.2 Network Select This sub-menu item allows you to select a network to register your radio. Network Sel is available only in TMO or Gateway mode, otherwise your radio display Service Restricted message. 4.15.2.1 Selecting Your Network Procedure: 1 From the home screen, press the Menu key.

  • Page 116: Talkgroup Network Select

    MN001488A01-BR Chapter 4 : Main Menu 4.15.4 Talkgroup Network Select This sub-menu item allows you to select one or multiple networks to register your radio accordingly to the selected talkgroup. TG Net Sel is available when the selected talkgroup is a Any Net talkgroup or a InterSystem Interface (ISI) talkgroup, otherwise your radio display Service Restricted message.

  • Page 117: Location

    MN001488A01-BR Chapter 4 : Main Menu 2 Select Networks→TG Net Sel→Any TG Net. Your radio selects and registers to the network automatically from the predefined list. 4.16 Location NOTE: This is a Software Selling Feature. This sub-menu allows you to enable the GNSS, change GNSS accuracy, and view your position and testpage.

  • Page 118: Changing Gnss Accuracy

    MN001488A01-BR Chapter 4 : Main Menu • Version – Displays detailed information on software version: SW (software version), HW (hardware version), ASIC (application-specific integrated circuit), RC (release code). 4.16.4 Changing GNSS Accuracy Procedure: 1 From the home screen, press the Menu key. 2 Select Location→Accuracy.

  • Page 119: Packet Data

    MN001488A01-BR Chapter 4 : Main Menu 4.17 Packet Data NOTE: This is a Software Selling Feature. The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet Protocol (IP). NOTE: To transfer data from a standard computer over the air, connect the computer using the data cable PMKN4129 with your radio.

  • Page 120: Crypto Menu

    MN001488A01-BR Chapter 4 : Main Menu 4.18 Crypto Menu This sub-menu allows you to manage SIM card based End-to-End Encryption. The End-to-End Encryption is used for: • Encryption of voice transmission in the DMO and TMO Modes. • Encryption of messages transmission in the TMO Mode. •...

  • Page 121: Updating Encryption Keys

    MN001488A01-BR Chapter 4 : Main Menu • To enable the alarm to ring once at the beginning of a clear call, selectSingle. • To enable the alarm to ring periodically throughout a clear call, select Continuous. 4.18.3 Updating Encryption Keys When and where to use: The Updating Encryption Keys menu is used to update old or incorrect encryption keys.

  • Page 122: Setting Dmo Encryption Mode

    MN001488A01-BR Chapter 4 : Main Menu 4.18.7 Setting DMO Encryption Mode Procedure: 1 From the home screen, press the Menu key. 2 Select Crypto Menu→DMO Encr Mode. 3 Enable the required mode by selecting one of the following options: • For crypto mode bit 1, select DMO 1.

  • Page 123: Chapter 5: Features

    MN001488A01-BR Features Chapter 5 Features Ambience Listening (AL) Call Ambience Listening Call allows a dispatcher to make a special call that allows listening to the conversations and background noises within the range of the microphone of a particular radio. The call is set up without any indication to the affected radio, and any lower priority ongoing voice call or packet data transfer may be preempted.

  • Page 124: Bluetooth Interactions

    MN001488A01-BR Chapter 5 : Features • Allow radio collaboration with various Bluetooth sensors or data capture devices, for example biometric sensors, bar code scanners, or firearm devices. • Increase connectivity with secure packet data services between the radio and a data device or a smartphone running appropriate applications.

  • Page 125: Bluetooth Smart Proximity Pairing

    MN001488A01-BR Chapter 5 : Features 5.2.4 Bluetooth Smart Proximity Pairing With the use of Proximity Pairing, you can instantly connect your radio with Bluetooth Low Energy (BTLE) devices. BTLE devices are various types of sensors the radio can be paired with using Bluetooth, for example gas or heart rate sensors.

  • Page 126: Call-Out

    MN001488A01-BR Chapter 5 : Features Call-Out NOTE: This is a Software Selling Feature. For those who use DMO mode, you are recommended to apply DMO SCK for data confidentiality. This feature allows you to receive Call-Out alerts. On receiving the Call-Out messages, the radio interrupts current services and attends to the Call-Out alert without any further delay.

  • Page 127: Call-Out Modes Interaction

    MN001488A01-BR Chapter 5 : Features Storm Plan An alert message that is sent by a dispatcher to a group of radios. To raise its reliability, it is sent several times. You are not able to respond to the Call-Out alert and any key press takes you to the information phase.

  • Page 128: Collaborative Messaging

    MN001488A01-BR Chapter 5 : Features • Accept • Reject • Menu NOTE: If your service provider allowed it, you can stop the alert tone by pressing any key. Information Phase You are still in the Call-Out mode and you can receive more detailed information about the incident that occurred through subsequent text or a voice message.
  • Page 129 MN001488A01-BR Chapter 5 : Features The Global Navigation Satellite System (GNSS) Location Service feature uses information from GNSS satellites orbiting the Earth to determine the approximate geographical location of your radio. The GNSS Location Service availability, accuracy, and the position calculation time vary depending on the environment in which you use the radio.

  • Page 130: Enhance Gnss Performance

    MN001488A01-BR Chapter 5 : Features 5.7.1 Enhance GNSS Performance Sometimes the GNSS feature is unable to complete a location calculation successfully. You hear an audible tone indicating that your radio cannot see the satellites. To maximize the ability of your radio to determine a location fix please note the following guidelines: •...

  • Page 131: Different Location Displays

    MN001488A01-BR Chapter 5 : Features 5.7.4 Different Location Displays Table 19: Different Location Displays Latitude/Longitude UK Coordinates Irish Coordinates Time Time Time Latitude 2-Letter Code 1-Letter Code Longitude Easting and Northing Coordi- Easting and Northing Coordi- nate nate Altitude Altitude Altitude Satellites Satellites...

  • Page 132: Home Mode Display Text Message

    MN001488A01-BR Chapter 5 : Features Home Mode Display Text Message Your radio is provided with a feature that allows your service provider to send special text messages to the display. The message is limited to 24 characters. The message stays on the home screen until a new home mode display message is received.

  • Page 133: Phone And Pabx Calls

    MN001488A01-BR Chapter 5 : Features Option Actions Making duplex calls in TMO a Press the Send key. b You hear a ringing tone until the called party answers the call. 6 To end the call, press the End key. 5.9.2 Phone and PABX Calls Phone Calls allow you to call a landline telephone number or a cellular mobile phone number.

  • Page 134: Ms-Isdn

    MN001488A01-BR Chapter 5 : Features 5.10 MS-ISDN This feature adds to your radio ISDN number. You can choose between MS-ISDN and ISSI to address the call, send the message or pre-defined templates. It works for both simplex and duplex calls, based on the assigned ISDN number.

  • Page 135: Radio User Assignment (Rua) And Radio User Identity (Rui)

    MN001488A01-BR Chapter 5 : Features Icon Description RMS Box Read Message RMS Box Unread Message 5.12 Radio User Assignment (RUA) and Radio User Identity (RUI) NOTE: This is a Software Selling Feature. Radio User Assignment (RUA) and Radio User Identity (RUI) enables authentication service. Only a successful logon to any temporary radio, provides full access and your permanent radio functionality, so you can be still reached with your permanent number.

  • Page 136: Short Number Dial

    Disable, your service provider cannot enable your radio. It is recommended to Permanent Disable your radio only when you do not expect to recover it. If it is recovered then a Permanent Disable radio can be reactivated by returning it to Motorola Solutions.

  • Page 137: Temporary Disable Or Enable

    MN001488A01-BR Chapter 5 : Features 5.17 Temporary Disable or Enable Your radio is provided with a feature that allows your service provider to disable it temporarily in case it is stolen. When your radio is disabled or is powered up in disabled state, it looks and acts like it is turned off.

  • Page 138: Tips For Browsing

    MN001488A01-BR Chapter 5 : Features 2 Usually, it brings up the Navigate pane, or the last browser menu pane. NOTE: If the web page you navigated to has two or more soft keys/options, the Options pane pops up. From here, you may scroll to other panes with the Left or Right navigation keys Or you may select Browser Menu and then scroll to the required pane.

  • Page 139: Saving Pages

    MN001488A01-BR Chapter 5 : Features 5.18.4.4 Saving Pages When and where to use: Save a page for off-line browsing. Procedure: 1 Enter the browser and browse to the required page. 2 Press Menu. 3 Scroll to Tools pane. 4 Select Save Page. Edit the proposed page title if required. Scroll down and select Save. The page will be saved in the Bookmarks Saved Pages folder.

  • Page 140: Browser Keys Usage

    MN001488A01-BR Chapter 5 : Features 5.18.7 Browser Keys Usage When the browser is active, the following usage described occurs inside or outside the editor. Table 22: Browser Keys Interactions Key Press Action Left or Right Soft key Selects the option that appears in the display directly above the left and right soft key (part of the page).

  • Page 141: Navigate Pane

    MN001488A01-BR Chapter 5 : Features The following panes are displayed according to the context: Table 24: Additional Menu Panes Menu Pane Description Options Displayed only when there are additional options for the pane or page. Image Displayed only when an image is selected. Provides access to im- age details, storage, and display use.

  • Page 142: Bookmarks Pane

    MN001488A01-BR Chapter 5 : Features Current Certificate – for viewing the digital certificate identifying the server that delivers the current document. A Certificate Authority (CA) digitally signs and thus authenticates this certificate. Up to ten additional custom WTLS certificates can be added to the default list of certificates installed.

  • Page 143: History Pane

    MN001488A01-BR Chapter 5 : Features 2 The browser displays the page (snapshot) saved using Save Page in Tools pane. 3 Scroll to a saved page. 4 Press Menu to open the Options pane for the saved page. 5 Select one of the following options: •...

  • Page 144: Text Input Pane

    MN001488A01-BR Chapter 5 : Features 5.18.15 Text Input Pane Prerequisites: This pane is visible when the browser menu is opened and text entry field is active. When and where to use: To input the text for the URL. Procedure: 1 Select the URL. 2 Press abc.

  • Page 145: Viewing Wap Messages

    MN001488A01-BR Chapter 5 : Features Low – icon is displayed with the New WAP Message tone. Delete – available only if you are in WAP Box, the text WAP Message deleted remotely is displayed, otherwise there is no indication. NOTE: Animation is not displayed if you are in a call, or in Emergency Mode, or in Call Out, or in message editor, or PIN lock state, or switching to DMO.

  • Page 146: Appendix A: Led Indications

    MN001488A01-BR Appendix A : LED Indications Appendix A LED Indications Table 26: LED Status Indications Indication Status Solid green • In use • Repeating call Blinking green • In service or idle • Switching modes from TMO to DMO Solid red •...

  • Page 147: Appendix B: Troubleshooting

    MN001488A01-BR Troubleshooting Appendix B Troubleshooting Your radio displays the following messages: Table 28: Displayed Messages Message Message Description Attachment Failed Your radio could not perform talkgroup attachment. It keeps on trying. If it does not succeed, try another talk- group. Authenticate Failure Your radio could not register on an authenticated system (for example, the Authentication Key is incorrect, or au-...
  • Page 148 MN001488A01-BR Appendix B : Troubleshooting Message Message Description Insufficient visible data Your radio is in the process of determining your location. This process may take several minutes to complete. Insufficient visible satel- Your radio is in the process of determining your location. lites This process may take several minutes to complete.
  • Page 149 MN001488A01-BR Appendix B : Troubleshooting Message Message Description Not Allowed To Transmit Release the PTT button and try again later. You are not allowed to send a text message or a status message to a number which is not in the address book. Overheating, Please Turn Your radio turns off.

  • Page 150: Appendix C: Maintenance

    Extending Battery Life A battery is an expendable part and may need replacing during the life of the radio. To ensure maximum service life of your radio, always replace the battery with a genuine Motorola Solutions replacement. Battery Charging Temperature If, during charging, the temperature is out of range, the battery might not be fully charged since the charging is temporarily stopped until the temperature becomes suitable.

  • Page 151: Looking After Your Radio

    MN001488A01-BR Appendix C : Maintenance Looking after Your Radio Never leave your radio or battery in extreme temperatures, for example, behind a windscreen in direct sunlight. When the radio is not used together with an accessory, it is recommended to use an Accessory Connector Cover (part number PMHN4178A) to keep the connector clean and in good condition.

Table of Contents