Take Picturemate Pal With You - Epson PictureMate Pal PM 200 Basics Manual

Take PictureMate Pal With You

PictureMate Pal's handle makes it easy to carry short
distances. If PictureMate Pal is going to travel a longer
distance, pack it carefully to protect it from damage.
Caution: Keep PictureMate Pal out of the sun and
don't leave it in your car or other location where it
can get too hot or too cold. Otherwise PictureMate
Pal may be damaged or ink may leak.
1
Press the On button to turn off PictureMate
Pal.
2
Wait until the On light goes out, then unplug the
power cable from the power outlet.
3
Remove all paper and printed photos.
4
Unplug the power adapter and USB cables from
PictureMate Pal.
5
Close the paper support and output tray.
6
Pack PictureMate Pal in the box that it came in or
the optional carrying case. Place the power cable
and adapter in the accessory box that came with
PictureMate Pal and pack it with PictureMate Pal.
Caution: Make sure the photo cartridge is installed. Do not
remove the photo cartridge before transporting. Don't place
PictureMate Pal on its side or upside down, or ink may leak.
Note: If your prints don't look as good after PictureMate Pal has
been moved, try aligning the print head (see page 41).
37