Epson PictureMate Pal PM 200 Basics Manual page 32

6
When you are finished, disconnect your camera
from PictureMate Pal before inserting a memory
card in PictureMate Pal.
Printing Wirelessly From a Bluetooth
Device
You can print photos wirelessly from your
Bluetooth-enabled PDA, cell phone, or
computer when you use the optional Epson
Bluetooth Photo Print Adapter. The adapter
(part# C12C824383) is available from your
local reseller or Epson (see page 33).
Note: While PictureMate Pal complies with the Bluetooth
specification, it is not guaranteed to work with all devices
enabled with Bluetooth wireless technology. Make sure your
photos meet the requirements listed on page 3.
1
Make sure PictureMate Pal is on but not printing.
Caution: Do not connect or remove the Bluetooth Photo
Print Adapter while it is communicating with device or
while PictureMate Pal is printing; this may cause
PictureMate Pal to malfunction.
2
Plug the adapter all the way into the
the back of PictureMate Pal.
3
Make sure you are within about 30 feet of
PictureMate Pal.
port on
31