Epson PictureMate Pal PM 200 Basics Manual page 35

Replacing the Print Pack
Make sure you have a new PictureMate 200 Series
Print Pack before you remove the old photo cartridge.
Once you remove the cartridge, you must install the
new one right away.
Caution: Before you replace the cartridge, read the "Photo
Cartridge Safety Instructions" on page 52.
1
Make sure PictureMate Pal is on but not printing.
2
Open the cartridge door on the back of
PictureMate Pal.
34
3
Slide the cartridge lever left, to the Release
position.
Caution: Do not try to pull out the cartridge without
moving the lever.