Take Your Picturemate With You - Epson PictureMate Express Edition - Compact Photo Printer User Manual

Take Your PictureMate With You

PictureMate's handle makes it easy to carry short
distances. If your PictureMate is going to travel a
longer distance, you should pack it carefully to protect
it from getting damaged.
Caution: Keep PictureMate out of the sun and
don't leave it in your car or other locations where
it can get too hot or too cold.
1
If PictureMate is on, turn it off.
2
Wait until the LCD screen goes blank, then unplug
the power cord from the electrical outlet.
3
Remove all paper and printed photos.
4
Push down the top of the paper support and close
it against PictureMate. Then close the output tray.
40
5
Disconnect the power cord and any connected
USB cable from the back of PictureMate.
6
Pack PictureMate along with its power cable and
adapter in the box that PictureMate came in, or in
the optional Carrying Case.
Caution: Make sure the photo cartridge is installed
before transporting. Don't place PictureMate on its side
or upside down, or ink may leak.
Note: If your prints don't look as good after PictureMate
has been moved, try aligning the print head (see
page 47).
Tip: You can order an optional PictureMate Carrying Case
from the Epson Store. See the inside back cover of this
book for details.