Software Installation Problems - Epson PictureMate Pal PM 200 Basics Manual

PictureMate Pal sounds as though it is printing, but
nothing prints.
●
PictureMate Pal may be preparing to print.
●
The print head may need cleaning. See page 40.
● PictureMate Pal won't work properly if it's tilted or
at an angle. Place it on a flat, stable surface.
● Make sure paper is not jammed and is loaded
correctly, and make sure the handle is not resting
on the paper. See page 5.
Your memory card does not work correctly.
●
Insert only one card at a time.
●
Make sure you are using a compatible memory
card. See page 6.
● PictureMate Pal recognizes and can print the first
999 photos on a memory card.
● Photos must be in JPEG or uncompressed TIFF
format and taken with a DCF-compliant camera.
● PictureMate Pal cannot read progressive-scan
JPEG files or RAW files.
●
Make sure to format your memory card in your
camera.
Printing is too slow.
●
It takes a few moments for PictureMate Pal to
process your images before printing them.
●
If PictureMate Pal is in a hot or sunny location,
move it to a cooler place and try printing again.
For faster printing, try these tips:
● Photos with borders print faster than borderless
photos.
●
Before you print, press Menu, select Color Effect,
and set it to None.
●
JPEG photo files print faster than TIFF files.

Software Installation Problems

●
Follow the instructions beginning on page 15 to
install your software. Don't connect PictureMate
Pal to your computer until you are instructed to.
●
Close other programs, including screen savers and
virus protection software, and try installing again.
●
Make sure your system meets the requirements
listed in your on-screen User's Guide.
●
To print over a network, see the on-screen User's
Guide for instructions on setting up printing.
45