Epson PictureMate Pal PM 200 Basics Manual page 37

7
Slide the lever all the way right, to the Lock
position.
Caution: If the cartridge is not inserted correctly,
PictureMate Pal will not be able to print.
8
Close the cartridge door all the way.
36
PictureMate Pal starts charging and displays a
message.
9
When it's finished charging, press OK.
Checking Print Pack Status
You can check the status of your Print Pack at any time.
1
Press Menu.
2
Press l or r to highlight PrintPk Status and press
OK. You see the status displayed on the photo
viewer screen.
3
Press Cancel to exit.
Note: If the screen displays a Print Pack low message, you
should buy a new PictureMate 200 Series Print Pack. See
page 33 for details.