Enabling Automatic Dect System Selection - Nortel DECT 4027 User Manual

DECT system configuration

Enabling automatic DECT system selection

If you subscribe the handset to more than one DECT system, you can
configure your handset to automatically select the system to which it
connects.
If Automatic selection is enabled, when the handset moves out of range of
the current system, it automatically attempts to connect and log on to
another available (subscribed) DECT system.
To enable automatic selection of a DECT system, perform the following
steps:
Network select
50
Get user manuals: See SafeManuals.com
1. Open the
"Accessing the Connectivity menu" (page
2. Press the
select
3. Press the
Select
4. Highlight
Auto. select
5. Press the
Select
The name of the currently active system highlights.
6. Press the
idle display.
Connectivity menu using the steps in
Up or Down key to highlight the
option.
Select soft key.
Auto. select.
Select soft key.
Clr key one or more times to return to the
46).
Network