Epson Stylus Pro 7900 User Manual page 84

84 | Handling Paper and Other Media
8. Examine the printed pattern for the most evenly overlapping lines.
Choose the number with the most even lines. In the example shown
above, the lines under number 4 are the most even.
After printing the pattern,
9. Press u or d to select the number that you noted in step 8, then press
.
OK
10. Press l, then d to select any of the menu options shown below. Make
adjustments as needed, and press
to return to the menu.
You can also make similar settings using the printer driver software. For
instructions, see page 112 (Mac OS X) or page 141 (Windows).
• PAPER FEED ADJUST
value if you see white lines on your prints, or a higher value if you
see dark lines.
• DRYING TIME
smearing the ink. You can make the print head wait up to
10 seconds after each pass to allow ink to dry on the page.
• PAPER SUCTION
printing on thin media (under 12 lb), such as drafting paper or
backlight film.
• SET ROLL PAPER TENSION
or for cloth or thin paper, or if the paper wrinkles during
HIGHER
printing.
• REMOVE SKEW
film.
11. When done, press
After you create paper configurations, you can use the
print out a list of paper numbers showing the settings for each one.
THICKNESS NUMBER
to save each setting. Then press l
OK
helps eliminate banding. Choose a lower
lets you print with non-Epson media and avoid
lets you decrease the paper suction level when
lets you adjust the tension to
helps reduce paper skew for very thin media or
.
84
is highlighted.
HIGH
menu to
TEST PRINT