Replacing A Battery Pack - Compaq Presario M2000 Hardware And Software Manual

Power
Selecting Power Conservation Settings
To set the notebook to use less power:
■
Select a short wait for the screen saver and select a screen
saver with minimal graphics and motion. To select a screen
saver and a screen saver wait time:
Select Start > Control Panel > Appearance and Themes >
Display > Screen Saver tab, and then follow the instructions
on the screen.
■
Select or create a power scheme that minimizes power use.
For more information about using power schemes, refer to the
"Using Power Schemes"

Replacing a Battery Pack

CAUTION: To prevent loss of work when removing a battery pack that
Ä
is the only power source, shut down the notebook or initiate hibernation
before removing the battery pack. (If you initiate hibernation, do not
begin the following procedure until the power/standby lights are turned
off, indicating that hibernation is complete.)
3–24
section earlier in this chapter.
Hardware and Software Guide