Table of Contents
Advertisement
Figure 16. Inside Drawer View Showing the Failed Hard Drive
Replacing a Hard Drive
Use this procedure to replace a failed hard drive.
Prerequisites
Use SupportAssist to send diagnostic data to Dell Technical Support Services.
About this task
Hard drives can be replaced one at a time without shutting down the expansion enclosure.
Steps
1.
Find the SC180 and drawer that contains the failed drive. To identify the drawer with the failed driver,
look for a drawer fault LED.
CAUTION: Before opening a drawer, ensure that the Dell Storage Client does not display a
temperature warning. This issue must be corrected first to avoid potential drive failure and
data loss.
2.
Push and hold both drawer latches toward the center of the drawer and pull the drawer all the way
out until it stops.
Replacing SC180 Expansion Enclosure Components
25
Advertisement
Table of Contents
Troubleshooting
