Using The Control Panel Buttons - Epson Stylus COLOR 900G User Manual

If you don't press the
E
load/eject button in
step 3, the printer
enters default-setting
mode. If this
happens, turn off
the printer and return
to step 2.
Maintenance and Transportation

Using the Control Panel Buttons

If you cannot use the print head alignment utility program that came with
your printer, follow these steps to align the print head:
1 Make sure that letter-size paper is loaded in the sheet feeder.
2 While holding down the
to turn on the printer. Then release both buttons.
3 The S paper out light flashes for about three seconds. While it is
flashing, press the E load/eject button.
The printer prints a sheet of instructions in English, French, German,
Italian, Spanish, and Portuguese explaining how to align the print
heads. Follow these instructions.
4 After aligning the print head, turn off the printer to exit print head
alignment mode.
R
cleaning button , press the P power button
Page 147