Epson Photo Quality Glossy Film - Epson Stylus COLOR 900G User Manual

It is best not to
use the Maximum
printable area setting
in the printer software
when printing on
paper with a cut
corner. Part of your
document may print
in the cut out area.
Printing on Special Media

EPSON Photo Quality Glossy Film

Before you load glossy film, put a support sheet (packed with the media)
or a plain paper sheet beneath the stack.
Load up to 20 sheets of glossy film and select Photo Quality Glossy
Film as the Media Type.
You may get better results by loading one sheet at a time. With multiple
sheets loaded, the minimum top margin you can use is 1.2 inches
(30 mm). If you want to use a smaller top margin, load and print one sheet
at a time.
If your media has a cut corner, position it in the printer as shown here.
printable side
face up
Remove each sheet from the output tray immediately after it's printed.
Make sure each sheet is dry before stacking.
cut corner
Page 86