Epson Stylus COLOR 900G User Manual page 142

C265171
Hide thumbs Also See for Stylus COLOR 900G:
Table of Contents

Advertisement

If ink gets on your
hands, wash them
thoroughly with soap
and water. If ink gets
into your eyes, flush
them immediately
with water.
Never turn off the
printer while the
P power light is
flashing, unless the
printer hasn't moved
or made any noise for
more than 5 minutes.
Maintenance and Transportation
6 Lift the cartridge out of the printer and dispose of it carefully.
7 Lower the new ink cartridge into its holder with the label facing up and
toward the back of the printer. Then press down the ink cartridge
clamp until it locks in place.
8 If you need to replace the other ink cartridge, repeat steps 4 through 7
before going on to step 9.
9 Press the R cleaning button and close the printer cover.
The printer moves the print head and begins charging the ink delivery
system. The P power light flashes, and the printer makes various
sounds.
Charging takes about one minute. When it's finished, the
P power light stops flashing and stays on.
Page 141

Advertisement

Table of Contents
loading

Table of Contents