Running A Printer Check - Epson Stylus COLOR 900G User Manual

Troubleshooting

Running a Printer Check

You can run a printer check to determine whether the problem comes
from the printer itself or some other source. Follow these steps:
1 Make sure both the printer and computer are turned off.
2 Disconnect the interface cable from the printer.
3 Make sure paper is loaded in the printer.
4 Hold down the E load/eject button, then press and release the Ppower
button. Continue holding down the E load/eject button until the
P power light starts to flash, then release it.
The printer prints one page containing the printer's ROM version, ink
counter code, and a nozzle check pattern. Only the nozzle check
pattern is shown below:
Page 155