Load Paper - Epson WorkForce 600 Series Start Here Manual

5

Load paper

1
Open the paper support and pull out the extension.
2
Extend the output tray and raise the stopper.
Note:
If you are using legal-size paper, do not raise the stopper.
3
Flip the feeder guard forward, then squeeze the edge guide and slide it to
the left.
4
Load paper against the right edge guide and behind the tab, with the
printable side face up.
Note:
Don't load the paper sideways; always load it
short edge first.
5
Slide the edge guide over, then flip the feeder guard back.