Installation Guidelines - Cisco Catalyst 9500 Series Hardware Installation Manual

Installation Guidelines

C9500X-FAN-1U-R or C9500X-FAN-1U-F
Figure 26: Fan Tray Unit with Dual-Stacked Fans
1
2
Installation Guidelines
Observe these guidelines when removing or installing a fan module:
• Do not force the fan module into the slot. This can damage the pins on the switch if they are not aligned
• A fan module that is only partially connected to the switch can disrupt the system operation.
• The switch supports hot swapping of the fan module. You can remove and replace the module without
• All fan modules should be of the same model (C9500X-FAN-1U-R or C9500X-FAN-1U-F). Installation
Warning
Cisco Catalyst 9500X Series Switches Hardware Installation Guide
56
Fan LED
Fan assembly levers
C9500X-FAN-1U-R has a red-colored
lever
C9500X-FAN-1U-F has a blue-colored
lever
with the module.
interrupting normal switch operation.
of mixed type of fan modules is not supported.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Installing Field Replaceable Units
3 Fan assembly retention latch
4 Fan