Table of Contents
Advertisement
o t
Q t
NOTE!
General ventilation for the room should be still
provided in accordance with "UNI ISO EN
7730" norm, "VDI2052" guideline and "DW/172
UK" or local regulation.
F.4
Positioning
To facilitate transport and site installation or disassembly and
transportation to the work site, technicians authorized by this
company are responsible for assembly.
NOTE!
The company will not assume any responsibility for
any damage or danger caused by unauthorized
disassembly and installation.
After commissioning is complete, the machine can be used.
The machine must be taken to the place of installation and the
packing base removed only when being installed.
IMPORTANT
Do not place the dishwasher near hot sources such
as fryers, ovens, or hotplates.
Arranging the machine
1. Wear protective gloves and unpack the machine.
2. Lift the equipment with a lift truck, remove the base and
position it the place of use.
m
m
0
4 0
i n
m
o t
Q t
m m
0 0
n 4
m i
3. Put each section of the machine in sequence and connect
them together and install in place.
4. Carefully remove the protective film from the outer plate
without tearing it, to avoid leaving traces of glue.
5. Adjust the equipment by turning the special adjustable
feet.
Make sure it is perfectly level, both length wise and
crosswise.
F.5
Disposal of packing
The packing must be disposed of in compliance with the
current regulations in the country where the appliance is used.
All the packing materials are environmentally friendly.
They can be safely kept, recycled or burned in an appropriate
waste incineration plant. Recyclable plastic parts are marked
as follows:
17
Advertisement
Chapters
Table of Contents
