Using Your Cx6400 As A Card Reader - Epson Stylus CX6400 Quick Reference

After the CX6400 reads the card, if it finds any images saved in a compatible
format (see note below), you see the following screen:
5. Press the button next to
To remove the card, pull it straight out of its slot. On a Macintosh, drag the card
icon on your desktop to the
Caution:
Do not remove the card or turn off the CX6400 while the memory card light is flashing,
or you may lose data on the card.
Note:
Your image files must meet these requirements:
File format
Media format
Image size

Using Your CX6400 as a Card Reader

You can use your CX6400 as an external card reader, letting you copy images from
a card to your computer, or vice versa. To use this feature with Windows
Me, make sure you've already installed your CX6400 software as described on the
Start Here sheet (this automatically installs the necessary USB storage driver).
1. Make sure your CX6400 is turned on and connected to your computer.
2. Insert a memory card as described in the previous section. (If you'll be copying
images to the card, make sure the card's write-protect tab, if it has one, is set to
allow writing on the card.)
Note:
If this is your first time inserting a card, see "Using EPSON CardMonitor" on
page 23 to set up EPSON CardMonitor.
22
Using Memory Cards
Found Images...
Total XXX
(shown on the screen).
OK
icon before removing the card.
Trash
JPEG or TIF format image files (supports Exif version 2.1/2.2)
DCF (Design rule for Camera File system) version 1.0
Vertical 120 to 4600 pixels, horizontal 120 to 4600 pixels
OK
®
98 or