Changing Copy Settings - Epson Stylus CX6400 Quick Reference

3. Close the scanner lid.
4. Press the
Copy
5. The default copy settings are displayed on the LCD screen. Change any
necessary copy settings, as described in "Changing Copy Settings" (below).
6. Press the
Color Copy
(to make black-and-white copies). Your document is scanned and then
printed. If you're using the
Layout" on page 18), follow the instructions on the LCD screen to scan
additional sheets.
Caution:
Never open the scanner section while scanning or copying, or you could damage the
CX6400.

Changing Copy Settings

The current copy settings are shown on the LCD screen. You can change the
settings as described below.
Copy Mode button
Print quality
Note:
You can save the current copy settings (except for the number of copies) by pressing
the Save button for 3 seconds until you see the message "Stored" on the screen. To
recall these settings, press and hold the Recall button for 3 seconds.
If you want to clear the current copy settings and return the CX6400 to its default
settings, press and hold the Reset button for 3 seconds.
button to enter Copy Mode.
button (to make color copies) or
or
2-up
Paper type
Menu selection buttons
Copy Layout setting (see "Copy
4-up
Reduce/enlarge
Paper size
Changing Copy Settings
button
B&W Copy
Number of copies
15