Using Your Cx6600 As A Card Reader - Epson Stylus CX6600 Quick Manual

To remove the card, pull it straight out of its slot.
Caution:
Do not remove the card or turn off the CX6600while the memory card light isflashing,
or you may lose data on the card.
Note:
Your image files must meet these requirements:
File format JPEG or TIF format image files (supports Exif version 2.1/2.2)
Media format DCF (Design rule for Camera File system) version 1.0
Image size Vertical 120 to 4600 pixels, horizontal 120 to 4600 pixels
Using Your CX6600 as a Card Reader
You can use your CX6600 as an external card reader, letting you copy images from
a memory card to your computer, or vice versa. To use this feature with Windows ®
98SE or Me, make sure you installed your CX6600 software as described on the
Start Here sheet (this automatically installs the necessary USB storage drivers).
.
2.
.
Make sure your CX6600 is turned on and connected to your computer.
Insert a memory card as described in the previous section. (If you'll be copying
images to the card, make sure the card's write-protect tab, if it has one, is set to
allow writing on the card.)
Note:
If this is your first time inserting a card, see "Using Epson CardMonitor" on
page 22 to set up Epson CardMonitor.
Once the card is inserted, it appears as a removable drive icon on your
computer. Copy images to or from the card, as needed.
Note:
If you copy images to the card, the number of images shown on the LCD screen
does not automatically change. You must remove and reinsert the card to make the
CX6600 recognize the new images.
Using Your CX6600 as a Card Reader 21