Maintenance - Vacmaster Joey Compact User Manual

GB
CAUTION: To reduce the risk of an electric shock, remove the vacuum cleaner from the
charging base, and ensure the machine is turned off before performing any maintenance.
1. Emptying the Dust Bin
NOTE: For the best performance, empty the dust bin after every use. Never operate the vacuum
cleaner without the dust bin and filter in place.
1) Remove the handheld vacuum cleaner from the main body by pressing the handheld vacuum
cleaner release button and detaching the handheld unit.
2) Hold the unit over a suitable household waste bin, and use one hand to press the two dust bin
release buttons (Fig. 11).
3) To separate the dust bin from the handheld vacuum cleaner body, lift the released end first and
pivot the dust bin upwards to detach the unit from the holding clip at the filter end of the unit.
4) Remove the filter basket from the dust bin. Empty the contents into a waste bin (Fig. 12).
2. Cleaning the Filter
NOTE: The key to maximum performance is having a clean filter. Cleaning the filter frequently will
help your vacuum cleaner operate at peak efficiency. A spare filter is provided with your vacuum
cleaner to allow you to dry one filter properly while using the other. Additional filters can be
purchased from www.cleva-europe.com.
1) Remove the filter from the filter basket. With a soft, dry brush, clean any accumulated debris
from the side screens of the filter and the filter basket (Fig. 13).
2) After repeated use, it may be necessary to wash the filter basket and filter. Hand wash in warm
water. After washing, set aside and allow to air dry for 24 hours.
IMPORTANT: Ensure the filter and filter basket are completely dry before reinstalling.
3) Insert the clean and dry filter into the basket and fit the basket into the dust bin ensuring an air
tight seal is formed around the dust bin opening.
4) Reconnect the dust bin to the handheld vacuum cleaner. To do so, insert the filter end of the
dust bin into the holder first and ensure the holding clip is securely located into the dust bin lid.
Press the other end of the dust bin into position until you hear a 'click' (Fig. 14).
3. Cleaning the Motorised Floor Head and Removing Blockages
The brush roll may accumulate debris such as strings, hair and fibres. This type of debris can wrap
around the brush and diminish its ability to clean effectively.

MAINTENANCE

10