- 10V Bms With Water Temperature Monitoring - Jaga BRIZA 12-JFCC Manual

A. 0 - 10V BMS WITH WATER TEMPERATURE MONITORING
A.1. FACTORY SETTINGS
The device is controlled via BMS. The unit starts when there is a 0-10V control signal and the preset water
temperature has been reached.
The unit starts if the water temperature is > 28°C/82 ̊ F and the
control signal is 1-10V.
Only with configuration code FCC.BR722 / FCC.BR724!
The unit starts if the water temperature is < 18 ̊ C /64 ̊ F and the control
signal is 1-10V.
Fan speed in function of the incoming control signal.
Window contact
The window contact is not activated by default and has to be activated /deactivated manually .
ON
Switch on : turn on the DIP switch 1
1 2 3 4 5 6 7 8
JAGA NV | BRIZA 12 - JFCC | MANUEL | 2023.03.06 | V.5.2
RS485 A/B I2C
PC / RF CO2
CONTROL PANEL
THERMOSTATE 1
ON
GND 0-10V 24V 1 2 3 4 5 6 7
GND 24V
DIPSWITCH
GND 24V
GND NTC1 GND 0-10V +24V +24V RC GND
[I]
(GND /
4-pipe
[B]
[C]
POWER 45W
INPUT: 110-240VAC
OUTPUT: 24V
Tsens 1
Tsens 2
Tsens 3
Tsens 4
N L
8
JAGA
IN/OUT GND 0-10V V.H. GND 0-10V V.C.
[A]
0-10 V ) (230V - 50Hz)
strain relief
Max
Min
0 1
curve : Speed versus 0-10V control signal
ON
1
4-pipe
2-pipe
BMS (V)
10
EN
43