Mitsubishi Electric i-MTR2-G02-M0 Data Book page 45

UNIT DESCRIPTION 9. OPTIONAL ACCESSORIES
OPTIONAL ACCESSORIES: P041 - FLOOR STAND H 255-350MM
OPTIONAL ACCESSORIES: P042 - FLOOR STAND H 355-450MM
OPTIONAL ACCESSORIES: P043 - FLOOR STAND H 400-510MM
The accessory is supplied in a mounting kit.
It is not possible to install the floor stand together with the plenums under the unit.
The floor stand is available in 3 different heights.
VERSION (1)
SIZE
A
B
C
D
MODEL
Min height mm
Max height mm
1. U = Under, delivery air flow down / O = Over, delivery air flow up
OPTIONAL ACCESSORIES: 3601 – COMPRESSORS OPERATING SIGNAL
A voltage free electrical contact is provided for the remote "Compressors operating" signal.
The electrical connection is shown on the terminal board of the unit.
OPTIONAL ACCESSORIES: 2411 – PHASE SEQUENCE CONTROL
The system checks that the sequence of the electrical supply phases is correct to
avoid reverse rotation of the three-phase electric motors of the unit such as the
compressor motors.
The accessory is installed in the electrical panel downstream of the main door lock
switch and in the event of an incorrect phase sequence it prevents the unit from
starting.
ELCAdoc 19/05/2021
Data Book
i-MTR2-G02-M0_0521_EN
mm
mm
mm
mm
P041 - Hmax350
255
350
U / O
E2
785
650
659
691
P042 - Hmax450 P043 - Hmax510
355
450
400
510
45