Blaupunkt BC3010 Instruction Manual page 14

BC3010/5010
tightening of the screws. With new devices, the bolt tightening should be checked after about 2 first
hours of operation. Tighten the loosened bolts if necessary.
6. Ensure that all components of the power tool are in good working order and do not overload or carry
out any work for which the device is not intended
Brush cutter
Motor type: electric, brush
Motor power: 1400 W
Rotational speed: 7500 rpm
Cutting diameter of the string: 420 mm
Type and type of head: semi-automatic/double string
Recommended string diameter: from 1.6 mm to 2.0 mm
Noise and vibrations.
The noise and vibrations have been measured in accordance with 2000/14/EC, 2005/88/EC .
Noise emission: Sound pressure level (LpA): 75.51 dB (A)
KpA deviation: 3,00 dB (A)
Measured sound power level LwA: 95.51 dB (A)
KwA deviation: 0.93 dB (A)
Guaranteed sound power level: LwA: 96.00 dB (A)
Total vibration value and measurement uncertainty (K):
The value of vibrations acting on the upper limbs: 7.95 m/s² , k=1.5 m/s²
The declared total vibration value has been measured according to the standard test method and can
be used to compare
one device to another. The given vibration emission value may be used for the preliminary estimation
of the negative impact.
After every 15 minutes of work allow 15 minutes break.
12