Status And Error Messages - Epson B-300 User Manual

Status and error messages

This section describes the meaning of messages displayed on the LCD screen.
The table below describes the status messages.
Message
Cancel
Charging ink
Cleaning
Please wait
Printing
Ready
Power save
Power off
The table below contains error messages, a brief description of each message and suggestions for
correcting the problem.
Message
Service call see guide
Printer near end of service
life
Nozzle maint error see
guide
Description
The print job is canceled.
The printer is charging the ink.
The printer is cleaning the print head.
The printer is starting.
The printer is initializing the settings.
The printer is processing data.
The printer is ready to print.
The printer is in the power save mode.
The printer is shutting down.
Problem
Service call error occurs.
Parts inside the printer are at the end of
their service life.
Print head nozzles are clogged or
misaligned.
B-300/B-500DN
Solutions
Turn off the printer and then back on. If
the error does not clear, contact Epson
Service Center.
& See "Epson Service Center" on page
147.
Contact Epson Service Center to
replace them.
& See "Epson Service Center" on page
147.
Perform the nozzle check and print
head cleaning.
& See "Checking the Print Head
Nozzles" on page 107.
& See "Cleaning the Print Head" on
page 109.
Press the OK button to recover from
error status.
Using the Control Panel
User's Guide
82