Epson B-300 User Manual page 65

8. Click Settings to adjust the way your poster will be printed. The Poster Settings window
opens.
9. Make the following settings:
Print Cutting Prints guide lines for cutting.
Guides
Overlapping Slightly overlaps the panels and prints alignment markers so that the panels can
Alignment be aligned more precisely.
Marks
Trim Lines Prints border lines on the panels to guide you when trimming the pages.
Note:
If you want to print only a few of the panels without printing the entire poster, click the panels that you
do not want to print.
10. Click OK to close the Poster Settings window.
After completing the steps above, print one test copy and examine the results before printing an
entire job. Then follow the instructions.
& See "How to make a poster from your printouts" on page 66.
B-300/B-500DN
Printing with Special Layout Options
User's Guide
65