Table of Contents
Advertisement
5.2
Terminal description
No.
Function
1
System power supply connector
2
RS485 connector
3
LAN (PoE)
Reset button
4
Press and hold this button for 10 seconds at any time to restore the device to the factory
defaults. The status indicator will go off for 3 seconds then start to flash slowly.
Status indicator
On: the device is working normally
■
5
Off: the device is not powered on
■
Flashing quickly: the device is working abnormally (e.g. IP conflict, no MAC address)
■
Flashing slowly: the device has not obtained the signature
■
Product manual 2TMD041800D0042
3
4
5
Product description
1
2
│7
Advertisement
Table of Contents
