Table of Contents
Advertisement
[2] On the "Floors Selection" screen:
Select the designated floors which need to support the "elevator control" function.
■
–
When a floor is pressed, the selection will be displayed visually.
–
Click "Select all" to select all floors.
–
Click "Inverse" to invert the selection of the existing floors.
Note
Please note that the first floor above the ground will be indicated with the
number 1, and the one right below, with the number -1.
Click "Next".
■
Product manual 2TMD041800D0042
Commissioning
│23
Advertisement
Table of Contents
