ABB H8308 Product Manual page 26

[7] On the "Channel Setup" screen,
Select the floor no. and the function for each channel.
■
– "Calling up"
– "Calling down"
– "Authorization"
Click "Clear" to clear all the inputs in the table for the current relay module.
■
[8] Click "Save". The data can be viewed on the "Saved Configuration" screen.
[9] Click "Print" to print out the relay configurations for installation reference.
[10] The "Installation Guidelines" screen shows more details about the installation.
Product manual 2TMD041800D0042
Commissioning
│26