Table of Contents
Advertisement
3.
Connect the SAS cable and DC cable to the drive as shown in the figure below.
Connect the DC cable of the server to the DC connector port at the rear of this LTO
device.
Do not use the DC connector of SAS cable. The DC
connector of SAS cable is disabled, accordingly,
connecting such as cable will not power on the LTO
device.
4.
After connecting the SAS cable, bundle the cables so that it does not interfere with the
other devices or fan.
5.
Attach the cover to the server. Plug the power cable to the outlet
6.
Turn on the server.
Use this
DC connector
Do not use
the DC connector
19
Advertisement
Table of Contents
