16
PART NAME AND FUNCTION
The Built-In LTO has the following parts and functions.
Front
Rear
①
① Cartridge load compartment (Cartridge Door)
The cartridge load compartment is a slot used to
mount or dismount the cartridge.
② Ventilator
The ventilator cools and ventilates inside of the
device.
③ Eject button
The button is for ejecting the cartridge from the
tape drive.
④ Ready LED (green)
The Ready LED provides information about the
state of the drive with light.
⑤ Drive LED (amber)
The Drive LED provides information about error of
the hardware of the drive.
⑥
Tape LED (amber)
The Tape LED provides information about a defect
of a cartridge inserted the drive.
⑦ Clean LED (amber)
The Clean LED provides information about cleaning
of the drive.
②
① SAS connector
Connect the internal SAS cable provided for the
drive.
② DC connector (5 V/12 V)
DC connector supplies power to the tape device.
Plug in the DC power cable provided with the
device.