Toro Groundsmaster 5900 Series Installation Instructions Manual page 4

Figure 5
1. Nut (5/16 inch)
2. Existing baffle
3. Secure the baffle to the existing baffle using a carriage
bolt (5/16 x 7/8 inch) and nut (5/16 inch) as shown
in Figure 5.
4. Loosely secure the left winglet baffle to the left side of
the mower deck with 2 carriage bolts (5/16 x 7/8 inch)
and 2 nuts (5/16 inch) as shown in
Figure 6
1. Nut (5/16 inch)
2. Carriage bolt (5/16 x 7/8
inch)
5. Remove the existing rear nut and bolt from the right
skid.
6. Loosely secure the right winglet baffle to the right
side of the mower deck, through the bumper, with a
carriage bolt (3/8 x 2-1/2 inches), nut (3/8 inch), 2
carriage bolts (5/16 x 7/8 inch), and 2 nuts (5/16 inch)
as shown in Figure 7.
3. Carriage bolt (5/16 inch)
Figure 6.
3. Left winglet baffle
1. Nut (5/16 inch)
2. Nut (3/8 inch)
7. Install and secure the 2 baffle divider plates to the
baffle and the mower deck with 4 carriage bolts (5/16
x 7/8 inch) and 4 flange nuts (5/16 inch).
Note: Position the baffle divider plates as shown in
Figure 8. Use only the top hole to secure the divider
plate to the baffle.
1. Carriage bolt (5/16 x 7/8
inch)
2. Baffle divider plate
4
Figure 7
3. Carriage bolt (3/8 x 2-1/2
inches)
4. Carriage bolt (5/16 x 7/8
inch)
Figure 8
3. Flange nut (5/16 inch)
4. Use the top hole.