MSA ICM 2000 Plus Operation Instructions Manual

ICM
2000 Plus
OPERATION INSTRUCTIONS
These instructions must remain attached to the ICM Unit 2000 Plus. The
end user ONLY is authorized to remove them from the device.
These instructions pertain only to the use of the version of the ICM Unit
2000 Plus which integrates with the SCBA. These instructions, in addition
to the instructions supplied with the SCBA, must be carefully read and
followed by all persons who use or maintain this product. This includes
those who have any responsibility involving its selection or application.
The ICM Unit 2000 Plus from MSA will perform as designed only if used
and maintained according to the instructions. Otherwise it could fail to
perform as designed and persons who rely on the SCBA could sustain
serious personal injury or death.
Use of this device must be consistent with the requirements of NFPA
1500 Fire Department Occupational Safety and Health Programs.
The warranties made by MSA with respect to the product are voided if the
product is not used and serviced according to the instructions in this manual.
We encourage our customers to write or call for a demonstration of this
equipment prior to use, or for any additional information relative to use
or repairs. During regular working hours, call 1-800-MSA-2222.
TAL 801 (L) Rev. 3
Unit
®
NOTICE
WARNING
© MSA 2008 Prnt. Spec. 10000005389(A) Mat. 10018725
Doc. 10000006812