Locations Of The Burners; Placement Of Burner Heads And Caps - Electrolux EW30GC55GS Use And Care Manual

locations of tHe buRneRs

The 30" cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows (See Figure):
- a 5 000 BTU (natural gas) burner located at the right rear position;
- a 18 000 BTU (natural gas) burner located at the left rear position;
- a 9 500 BTU (natural gas) burner located at the left front position;
- and a 14 000 BTU (natural gas) burner located at the right front position.
The 36" cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows (See
Figure):
- a 5 000 BTU (natural gas) burner located at the right rear position;
- two 9 500 BTU (natural gas) burners located at the left front and
left rear positions;
- a 18 000 BTU (natural gas) burner located at the center position;
- and a 14 000 BTU (natural gas) burner located at the right front
position.

PlaceMent of buRneR Heads and caPs

For the 18 000 BTU burner:
Place the burner head over the gas orifice (Figure 1). Be careful not to damage the
electrode while placing the burner head over the orifice. Make sure electrode fits
correctly into slot in burner head.
For all burners:
Place a burner cap on each burner head
(see Figure 2), matching the cap size to
the head size. The cap for each burner has
an inner locating ring which centers the
cap correctly on the burner head. Be sure
that all the burner caps and burner heads
are correctly placed BEFORE using your
appliance.
Make sure each burner cap is properly
aligned and level.
Turn the burner on to determine if it will
light. If the burner does not light, contact a
Service Center. Do not service the sealed
burner yourself.
Surface Cooking
Burner
Cap
Burner
Head
Gas
Opening
Electrode
Figure 1
9
O F F O F F
O F F O F F
30" cooktop
36" cooktop
Burner
Cap
Burner
Head
Figure 2