Guarantee Card And Terms - Mains MV4k/1 Instructions Manual

Guarantee card
GUARANTEE CARD
Chceckout controller type: MV4K
Dealer stamp
serial number:____________
Date of purchase _________________________
Warranty terms:
1. The Mains Company issue a warranty only on a properly operated unit for a period of 2 years (24 months).
2. The date from which the warranty is in force is the date of issuing the warranty card. The warranty period is specified in the description of each product.
3. Defects discovered during the warranty period will be removed free of charge within 14 working days from the date of delivery of the unit to the address
of Mains company, a warranty period is extended by the time of the repair.
3. The warranty card is valid, if it has entered the date of purchase and the stamp of the point sale.
4. In order to guarantee service one ought to deliver the product at its own expense, to the point of sale. After repairing the product will be send to
the advertiser at the expense of the guarantor.
5. Advertisers should deliver the device adequately protected against damage during the transport.
6. The advertiser is responsible for the loss of the machine during the transport, the guarantor obligates himself to deliver fixed unit to the advertiser
and is responsible for its loss during the transport.
7. During the warranty period defective unit will be repaired or replaced for the same free of defects.
8. This following warranty covers unit faults occurred during normal operation or due to manufacturing defects and does not apply to consumables
or other additional accessories.
9. The warranty does not cover defects caused due to:
- Arbitrary repairs, made by the user or other unauthorized persons, modifications or design changes.
- Mechanical, thermal, chemical or intentional equipment damages.
- Damage caused by other device parameters other than specified in the instruction in the principles of safety equipment use.
- Incorrect storage and maintenance of the equipment and other damages caused by the user.
- Reducing the quality of the product due to the natural process of wear such as abrasion of the outer covering of the product, scratches, etc.
- Damages resulting from noncompliance the proper operation rules and the usage of the equipment in the purpose other than its intended one.
controller: Mv4k 18
MAINS S.C. E.M.Wosińscy Brzeziny 95-060 ul. Słowackiego 12, tel/fax: 48 46 8752 777 www.mains.pl; mains@mains.pl