Additional Security Features - Mains MV4k/1 Instructions Manual

Additional security features for user:
The operations of the motor elevation cover sensor (optional)
In situations where the controller is switched on, (the motors are working or not), and from any cause the motor elevation cover sensor
will be switched on, the motor will be stopped immediately and the work permit function will be turn off too.
This is indicated by an intermittent tone and flashing of the SERVICE LED on the front cover.
One should then use the safety switch STOP [4] or turn the controller off the power with the use of switch POWER [5],
and remove the cause of switching on the sensor.
MAINS S.C. E.M.Wosińscy Brzeziny 95-060 ul. Słowackiego 12, tel/fax: 48 46 8752 777 www.mains.pl; mains@mains.pl MAINS S.C. E.M.Wosińscy Brzeziny 95-060 ul. Słowackiego 12, tel/fax: 48 46 8752 777 www.mains.pl; mains@mains.pl
Digital programmable belt controller
Digital programmable belt controller

Additional security features

SERVICE
S. START
2
OUT
CTRL POWER POWER
SERVICE
S. START
2
OUT
CTRL
WARNING!
The condition of re-enabling the work permit
function is to switch off the controller from the grid
and to make sure that the cause of its activation
was removed and switching on the power is
safe for the cashier counter users and the surrounding.
Mv4k
Mv4k
POWER POWER
controller: Mv4k
14