Mains MV4k/1 Instructions Manual page 13

Controller MV4K - handling
Turn on the conveyor belt to work using the footswitch:
Please press the button[2], a LED lights up.
In this mode, the conveyor belt operates according to the footswitch signals.
Pressing starts belt operatio
releasing - stops the belt.
Turn on the light circuit 1:
Pressing the button [3]turns on or off the circuit, this is indicated by LED next to the button.
- The first pressing causes the lamp to light continuously.
- The second pressing causes the lamp to glow intermittently.
- The third press turns off the lamp circuit.
Blinking function can be started programmatically, and then switching is typical: on / off.
MAINS S.C. E.M.Wosińscy Brzeziny 95-060 ul. Słowackiego 12, tel/fax: 48 46 8752 777 www.mains.pl; mains@mains.pl
Digital programmable belt controller
Digital programmable belt controller
SERVICE
S. START
2
OUT
CTRL POWER POWER
SERVICE
S. START
2
OUT
CTRL POWER POWER
Handling
Mv4k
Mv4k
controller: Mv4k 13