Inspecting The Bagger Attachment; Inspecting The Mower Blades; Installing The Mower Blades; Storage - Toro Z Master Professional 7500-D Series Operator's Manual

Inspecting the Bagger
Attachment
Service Interval: After the first 10 hours
Before storage
1. Check the chute, discharge tube, and the bagger
top. Replace these parts if they are cracked or
broken.
2. Tighten all nuts, bolts, and screws.
3. Inspect all the fasteners and latches; replace
any that are missing or damaged.
4. Inspect the grass bags for deterioration.
WARNING
You or bystanders could be severely
injured by flying debris or thrown objects
that may pass through torn, worn, or
deteriorated grass bags.
• Check the grass bags for holes, rips,
wear, and other deterioration.
• If the bag has deteriorated, install
new grass bags supplied by
the manufacturer of this bagger
attachment.
Inspecting the Mower
Blades
1. Inspect the mower blades regularly and
whenever a blade strikes a foreign object.
2. If blades are badly worn or damaged, install
new blades. Refer to your machine Operator's
Manual for complete blade maintenance.

Installing the Mower Blades

In most mowing conditions, the standard high-lift
blades provide the best bagging performance.
The Toro Atomic blade is recommended for bagging
leaves in dry conditions. In dry dusty conditions, the
medium lift or low lift blades will reduce dust and dirt
blowout while providing effective bagging air flow.
Contact an Authorized Service Dealer for the proper
blades for different mowing conditions.
Refer to the machines Operator's Manual for more
information on installing blades.

Storage

1. Clean the bagger attachment; refer to
the Bagger and Bags (page
2. Inspect the bagger attachment for damage; refer
to Inspecting the Bagger Attachment (page
3. Ensure that the bags are empty and thoroughly
dry.
4. Check the belt for wear or cracks.
5. Store the machine in a clean, dry place, out of
direct sunlight. If you must store the machine
outside, cover it with a weatherproof cover. This
protects the plastic parts and extends the life of
the machine.
23
Cleaning
22).
23).