Adjusting The Parking Brake; Checking The Tire Pressure; Operation; Positioning The Adjustable Baffle - Toro Z Master Professional 7500-D Series Operator's Manual

7
Adjusting the Parking
Brake
No Parts Required
Procedure
Ensure that the parking brake is adjusted properly;
refer to your Operator's Manual.
8

Checking the Tire Pressure

No Parts Required
Procedure
Note:
Increase the tire pressure due to the additional
weight.
Check and increase the air pressure in the front caster
wheels and rear tires (Figure
Air pressure in the rear tires: 138 kPa (20 psi)
Air pressure in the front caster wheels: 172 kPa
(25 psi)
Figure 20
20).
g001055

Operation

Note:
Determine the left and right sides of the
machine from the normal operating position.
Important:
Engage the parking brake when you
leave the machine unattended.
WARNING
To avoid personal injury, follow these
procedures:
• Become familiar with all operating and
safety instructions in the Operator's
Manual for the mower before using this
attachment.
• Never remove the discharge tube, bags,
bagger top, or the chute while the engine
is running.
• Always shut off the engine, wait for all
moving parts to stop, and remove the key
before clearing an obstruction from the
bagging system.
• Never do maintenance or repairs while the
engine is running.
Positioning the Adjustable
Baffle
Adjust the baffle to position B (middle position) for
bagging; refer to the Operator's Manual for the
machine.
15
Figure 21
g000947